Hello Guest it is June 20, 2019, 07:54:35 AM

Author Topic: New people welcome !! Come in here and introduce your self!  (Read 3354294 times)

0 Members and 2 Guests are viewing this topic.

Offline Tweakie.CNC

*
  • *
  •  7,816 7,816
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: New people welcome !! Come in here and introduce your self!
« Reply #2430 on: May 11, 2017, 01:02:20 AM »
Hi Cisco,

Welcome.

The Win7 32 bit requirement is for using the Parallel Port for PC / Machine communication.
If you use an external motion controller (there are many different types / manufacturers available - I use a Warp9 ESS) then you can use a 64 bit computer running Win10, if you choose.

Hope this helps.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: New people welcome !! Come in here and introduce your self!
« Reply #2431 on: May 11, 2017, 09:01:15 AM »
Hello,

This is Mariya and i'm new here. live in Toronto Canada. my profession is content marketing but i like to contribute some discussion where my knowledge would be increase.

Cheers.
Re: New people welcome !! Come in here and introduce your self!
« Reply #2432 on: May 11, 2017, 10:57:03 PM »
Hi my name Charlie. I started building a cnc plasma table for about 8 months on and off. Very new to mach3 and thc having issue with the probing  so if someone can help would very much like that.
Re: New people welcome !! Come in here and introduce your self!
« Reply #2433 on: May 12, 2017, 08:20:22 AM »
Hi folks, first post here.  I am new to CNC.  I just got my plasma table running with Mach3.  I am a retired engineer from the chemical and metallurgical industry.  My hobbies are golf, fixing/restoring old cars and hunting.  I also like to tinker with mechanical stuff.  I am currently using a combination of Autodesk, Corel draw and Inkscape to design stuff and cut it.  I love the capability this has added to being able to modify and build stuff.  I do have one issue with Mach3 that I haven't been able to figure out - after loading g code I only see the tool path for a cut file while scrolling the mouse wheel for a split second after each view enlargement occurs - then the window goes blank.  It also flashes on, then off, at major tool moves (touch-offs maybe?) while the program is running.  The cut files run fine - I just can't follow the progress in the window.  Its not that big a deal until you have a fault occur and want to locate the line it happened on - you can't follow the tool path progress in the window to the point it matches physically where the torch is when I press stop.  As this section is mainly for introductions, I'll re-post this issue in an appropriate part of the forum.
Re: New people welcome !! Come in here and introduce your self!
« Reply #2434 on: May 13, 2017, 10:28:39 PM »
Hi

My name is Leon.

It has been a lifelong dream to have my very own CAD system, workshop and CNC machine. I am a mechanical design drafter, used lots of different CAD systems, and finally bought Solidworks a few years ago. A few years later I got bit by the 3d print bug. Had the wiz bang idea, got it modelled in Solidworks, and then it took me ages to put the rest of the bits together. I bought a 4 axis CNC router, PC controller machine and Mach 3 so now, I just need to make some small modifications to the machine, and learn how to use Mach 3 and I will have achieved one of my longest running life goals, and will hopefully make an unfeasibly large amount of money if the wiz bang 3d printer thing works out. I joined this community in the hope for getting some advice on modding my CNC router into a practical CNC mill.

Re: New people welcome !! Come in here and introduce your self!
« Reply #2435 on: May 15, 2017, 07:55:30 AM »
Hi all,

I'm a professional embedded systems engineer that dabbles with mechanics on the side as I like to have the whole picture. Even as I'm an engineer at work, I'm still passionate about creating and modifying stuff when I'm off work. I have two 3D printers which are more or less always under re-construction and upgrade. Recently I bought one of them cheap chinese CNC3040T 4 axis CNC machines as a complement to my printers. I believe that the primary application for this machine will be PCB isolation routing manufacturing and some simpler geometry stuff like templates for airfoils and things like that. Oh, forgot to tell you, I'm also a Model RC aircraft pilot and builder.

I have chosen to not use the USB motion controller that came with the unit. It turned out to be a cloned unlicensed PlanetCNC controller making the choice of control software limited to only PlanetCNC. Instead, I've bought a Pokeys USB/parallell port interface which I plan to use with MACH4 hobbyist version. I'm still taking my very first steps in the CNC world just jogging the machine around, watching tutorials and reading manuals so I can't really tell yet how it's working. I think I'll run my first test pass routing a rectangle in a wooden block pretty soon.

Watch out for questions... some of them might even seem... eh... stupid 

/Thom
Re: New people welcome !! Come in here and introduce your self!
« Reply #2436 on: May 15, 2017, 11:02:48 PM »
Hello all, I am a CNC Prototype Machinist in Phoenix Az . I also built a home shop and picked up a EZ Path CNC lathe and an old Boss 5 mill.
The mill is what brought me here. It has the original control and I did get it to finally run, I know nothing about it except that it needs a new control. So, I bought a package deal Mach3/Bobcad setup and am in the process of converting it. Actually, I am just starting the conversion.
So hopefully I will gain some insight here and maybe even contribute a little.

I will commence to do some reading now, and will also start a thread shortly speaking some guidance.

  Thanks for letting me in here.

     Rick
Re: New people welcome !! Come in here and introduce your self!
« Reply #2437 on: May 19, 2017, 02:57:57 PM »
Howdy Folks:
My name is James Amato, but I much prefer Jim. I am an eighty year old semi-retired Design Engineer taking on small jobs for the attractions industries here in Central Florida. I’m an ardent rag sailor and in my younger days I made many long distance journeys. With those days only a memory I now satisfy that thirst by day sailing in the Indian River.
I am also into woodworking and just completed a full Kitchen remodel that took me 13 months to complete, in my spare time.
About four years ago I had heard about making a DIY CNC routers and decided to give it a shot. I built a 26 a 30 all aluminum gantry router, using Nema 23 motors. After going through a long Mach3 learning curve, I finally got the hand of it and started to produce some income with the machine. Like most things in life you simply never have enough and so early this year I designed and built a larger 50 x 65 open end Y axis unit. I have tested all the motors; limits and home switches and all work well. I am however not without problems. But the end is in sight.
Jim Amato
Re: New people welcome !! Come in here and introduce your self!
« Reply #2438 on: May 24, 2017, 11:12:37 AM »
Hi,
My name is Wayne and I live in Cape town South Africa, I have been a running CNC machines for 4 years now. I work for Rhino Marine Products and we make workboats from HDPE. We cut all our parts on a 2mx4m cnc router.

We have a Chinese - CZK-2040  CNC router.


I enjoy mountain biking. I love CNC.

Wayne
Re: New people welcome !! Come in here and introduce your self!
« Reply #2439 on: May 26, 2017, 07:51:48 AM »
Hello every one.
My name is Manolis and i live in Greece.My hobby's are ,RC Models ,Model Engineering,Woodworking and making wooden Clocks,
and large scale models  Abramsm1a1 http://diyscaledtank.weebly.com/abrams-m1a1.html
For the last 2 months i'm building a CNC Router 1m.X1.3m. all hard ware are completed but software   ??? using Mach3.
But my problem will be given in an other post. >:( :'(