Hello Guest it is November 03, 2024, 07:21:23 AM

Author Topic: New people welcome !! Come in here and introduce your self!  (Read 5018713 times)

0 Members and 5 Guests are viewing this topic.

Re: New people welcome !! Come in here and introduce your self!
« Reply #2410 on: March 27, 2017, 10:13:24 PM »
Hello, my name is Rick, I am a Silversmith located in Bandera, Texas. I just bought a Taishi Model 300x400 cnc. I am very new to cnc progams, but im sure i can figure it out if I research it enough. So far, my thoughts are, "what did I get myself into?"
\M/
TxnLobo
lopezsilver.com
Pinterest: Lopez Engraving

Offline Tweakie.CNC

*
  • *
  •  9,243 9,243
  • Super Kitty
Re: New people welcome !! Come in here and introduce your self!
« Reply #2411 on: March 31, 2017, 07:17:44 AM »
Quote
So far, my thoughts are, "what did I get myself into?"

Hi Rick,

Welcome to the forum.

I think you have got yourself into the most incredible adventure you could possible imagine.  ;D

Tweakie.
« Last Edit: March 31, 2017, 07:21:36 AM by Tweakie.CNC »
PEACE
Re: New people welcome !! Come in here and introduce your self!
« Reply #2412 on: April 01, 2017, 08:41:42 AM »
Hi im Adrian from the UK.  I have just bought a 3040 4 axis cnc from ebay with USB (RNR motion controller eCO V2).  This is to add to my existing toys - K40 laser engraver and vinyl cutter

Firstly has anyone got instructions for this machine in english as it keeps coming up error triggered Art code 8877 - i have followed advice on here but to no avail.   The motors are responding so receiving a signal. it freezes after about 30 seconds. i have purchased a dedicated win 7 32 bit pc for this.

this is the xll code

thanks in advance and just cant wait to make something :)
0Mach3Mill1024.set100001616018886320011101101110110111011011101100010010001001010110330310000310001320000310000310001320000310000300001320000000000000000000000000000000000000000000000100000100001350000100000100000100000100000100000100001310000100000100000100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001.000000000001.000000000001.000000000001.000000000001.000000000001.000000000001.0000000000010-1393738403334999999999999999999999999999999-1-1-1-1-1-1000.0.0.0.0.0.20.0.00.00.01.00.00.00.01.00.00.70.70.21.01.00.00110001110101G8000001020000000500001.5e+0021.1e+002362.4e-0030.0.00160161960011>>005.5.1.e+0021.638e+0040648192100100005xyzabc03500000101.3e+0031.3e+0031.3e+0030.-1-1-1-1-1-1-1-1-11.e+0021.e+0021.e+0021.e+0021.e+0021.e+0021.e+0021.e+00300011362010000C:\Mach3\Addons\CopyCat\CopyCat.set00008791001.1.1.1.5001.e+0030.0.10.10.251.0.300.10000240002000400024000000015050505020201.1.1.1.1.1.5.0.29.51.1.e-0030.10.10.10.0.1100.100.100.100.100.100.-100.-100.-100.-100.-100.-100.1111001111000000000101000123456100010001002021.408908244234400100.0.0.0.09600106000000101001022025100.0.101.0.0.0.0.12.07.425e-00404000.10.304000.15.903.0100.050.01.00.02.00.03.00.300.110.10100.00.200.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.050.00.00.00.00.00.00.00.00.00.00.00.00.01.02.05.e-00200.100.00.1136.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.10.00.00.00.00.00.00.00.00.00.030.00.00.00.00.00.00.00.00.00.00.00.10.01.01.00.0-1.e-00210.00.101.e-00200.00.10.01.11.012.10.100.10.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.01.12.00.00.00.100.11-0.2500.2510.100.00.00.00.00.10-0.10-0.111.00.00.00.00.00.00.00.00.00.00.00.00.00.00.05.00.500.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.01.e-0030.11.0.20.0.0.1.45.0.0.0.0.1.0.11.e-0021.e-0031.e-0041.0.11.e-0021.e-0031.e-00420.180.000000NoneNoneNoneNoneNoneNoneNoneC:\Mach3\GCode\Cutpocket.tapC:\Mach3\GCode\CutCircle.tapC:\Mach3\GCode\teach.tap001ArialArialArial1.5.0.0.0.0.0.0.0.0.2000120000C:\Mach3000000002500000250000025000002500000250000025000002500000250000025000002500000250000025000002500000250000025000002500000250000025000002500000250000025000000.0000.11Arial101010157600000000000000000000000100503None
Re: New people welcome !! Come in here and introduce your self!
« Reply #2413 on: April 01, 2017, 02:47:50 PM »
Hi all,

My name is Chris (aka grizin93.)  I am an amateur woodworker and stumbled over a CNC router for woodworking. I thought it was pretty cool and could maybe make some things to sell in my eBay store. I found some plans on the internet and my friend and I built a machine from scratch in February. I have been spending time in the last couple of weeks downloading and setting up MACH3. I have zero experience in machining and such. Yesterday, I obtained motor control for the first time. My Y axis is a little gimpy, but overall Frank (short for Poplar Frankenstein, the machines name) seems to be doing pretty well. I am going back to do some more motor tuning today as I am trying to get a nice smooth speed and diagnose what is wrong with my Y axis. I think it's probably a poor threaded drive rod, but I need to look some more for other potential issues. It also seems like my steps per rate is kind of low for smooth running, but I really have no clue right now. Calibration is next. It is a bit intimidating right now, but everything associated with this project has been intimidating but I have made it this far.  I am always open to suggestions or resources from anyone in getting started. I imagine I will be frequenting this place over the coming months so wanted to drop in and say hello. I would attach a photo of Frank if I could figure out how :)


New people welcome !! Come in here and introduce your self!
« Reply #2414 on: April 03, 2017, 05:27:14 PM »
Hi
I'm new here and new to CNC.
My name is Walt; MileHiDude is a handle from you tube that I thought I'd use here as well.

I've been a fabricator for about 30 years and in the last two years have run into an increasing need to custom mill a part.

As of this writing I have Mach 3 installed on a Dell Windows 10 computer in my shop.
However, my CNC plasma and mill are still in the beginning of a build process.

I'm very grateful for this forum and for the level of experience that I see here.

Thank you posters
And thank you ArtSoft


Sent from my iPhone using Tapatalk
Re: New people welcome !! Come in here and introduce your self!
« Reply #2415 on: April 04, 2017, 10:59:36 PM »
hello there all name is greg I am building a plasma cnc using mach 3 and sheet cam I am very green with mach 3 and can not fig out how to get the torch to turn on automatic I do not have thc at this time fig I would add it later if I could make this work . I also can not get the auto zero working as well any help would be greatly appreciated thanks all
Re: New people welcome !! Come in here and introduce your self!
« Reply #2416 on: April 12, 2017, 10:37:10 PM »
Hello
I am Fast  8)
I am just getting started in cnc I will need a lot of help to get started
 Thanks in advance for all the help  :o
Re: New people welcome !! Come in here and introduce your self!
« Reply #2417 on: April 19, 2017, 11:53:01 AM »
Hi!

   I'm new to CNC, i have buy a chinese CNC 6040z (USB) on ebay, and i dont figure out how to make it work..

by doing some search on the web i found this site, This site look very nice, and i'm sure that i will find good help here to help me learn how to use this new toy :)
Re: New people welcome !! Come in here and introduce your self!
« Reply #2418 on: April 20, 2017, 09:28:40 AM »
   on: April 20, 2017, 07:58:52 AM

"NO DRIVER SENSED" Hello my name is matt I am running Mach 3 with a new custom built windows 7 pro 32 bit paralell port setup but it will not run driver test, I am new to mach but I had a computer built specifically to run mach, I have setup in ports and pins everything all good there, I run the driver test is says no driver sensed, i tried a few things but it is stumping me, I have uninstalled and reinstalled ect, any suggestions my setup is a longs db25-1205 breakout board dm542 stepper drivers and nema23 motors HELP
Re: New people welcome !! Come in here and introduce your self!
« Reply #2419 on: April 21, 2017, 03:07:40 AM »
Hello,

My name is Patrick and I live in Switzerland. I am an Electronician reconverted as production/method specialist. I use a 3 axes CNC for hobbies since 4 years.
I encounter some issues with mach3 and a new PC. That's why I looking for some help here.