Hello Guest it is May 19, 2019, 03:04:03 PM

Author Topic: New people welcome !! Come in here and introduce your self!  (Read 3338924 times)

0 Members and 1 Guest are viewing this topic.

Offline Tweakie.CNC

*
  • *
  •  7,762 7,762
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: New people welcome !! Come in here and introduce your self!
« Reply #1790 on: August 28, 2013, 05:56:00 AM »
Hi Tony,

It would be best if you post your question as a new topic in the General section where it will get more attention and hopefully some suggestions towards resolving your problem (this area is just for introductions).

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: New people welcome !! Come in here and introduce your self!
« Reply #1791 on: August 28, 2013, 05:59:20 AM »
Hi Tony,

It would be best if you post your question as a new topic in the General section where it will get more attention and hopefully some suggestions towards resolving your problem (this area is just for introductions).

Tweakie.

Will do Thanks
Re: New people welcome !! Come in here and introduce your self!
« Reply #1792 on: August 28, 2013, 07:30:57 AM »
Morning and Hi all

my name is Bobby

I'm a new user with Mach, just installed my lic yesterday after trying out the demo mode for several weeks, nice piece of software..
I'm fairly new to cnc, I have converted a grizzly g0704 mill with ballscrews and a home built controller with drivers and motors from keling,,
it's nice to have the machine up and running,need to dial it in just a little more but i'm very close now..
my primary use will be for hobby,i want to do some rc copter parts at some point,that will all be new to me too...
live and learn right..
I'll be browsing for some projects to do in the meantime,help me get familiar with everything
 
thats about it,just a quick intro for me...I will be reading the forums,watching the videos and asking questions when I cant find the answer to something on my own.
I always try first... seems like there is plenty of support here and many good friendly people willing to help..


Oh yeah, for Tweakie
I really like your lithopanes, the grim reaper will be one of the first I do..

take care everybody and have a great day
BobbyR

Offline Tweakie.CNC

*
  • *
  •  7,762 7,762
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: New people welcome !! Come in here and introduce your self!
« Reply #1793 on: August 28, 2013, 08:14:45 AM »
Hi Bobby,

Welcome to the forum.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: New people welcome !! Come in here and introduce your self!
« Reply #1794 on: September 05, 2013, 04:14:10 PM »
Hello All,
My Name is Cuong Le and I am a totally new in CNC world.   Hope to learn from all of you.  Living Aloha Oregon, would love to meet some local friends, mentors.
Cuong
Re: New people welcome !! Come in here and introduce your self!
« Reply #1795 on: September 07, 2013, 08:33:22 PM »
Hello!

I am moving over from LinuxCNC. It's not that its bad software but more or less it only supports G93 Inverse Timing and the lower end CAM software doesn't support G93 yet. Some CAM packages say they never will support it and yet others have never heard of RS-274NGC or even NIST for that matter. So, loving my 4 axis machine I am dual booting with "Winders" and trying to get set up and start cutting some cool stuff!

jb
Re: New people welcome !! Come in here and introduce your self!
« Reply #1796 on: September 08, 2013, 10:15:29 AM »
Hi all,
 I am new here today. I have been using Mach3 for a few months now for my home made benchtop CNC machine. I am making small aluminium parts.
Re: New people welcome !! Come in here and introduce your self!
« Reply #1797 on: September 18, 2013, 12:25:13 PM »
hi.. all.. aim sany from malaysia..  new in cnc world.. making my cnc by aluminium profile...   I have been using Mach3 for a few week. i have some problem on it...
Re: New people welcome !! Come in here and introduce your self!
« Reply #1798 on: September 19, 2013, 05:28:55 PM »
Although of generous years, I haven't retired and work about full time with a company that converts customer's vans into campervans. It struck me that the repetitive cabinet making was an ideal subject for a CNC cutter. Never seen one im my life but a quick look round the internet and in particular Youtube, it seemed like something I might want to build. So, here I am, Brian Withers from England, built the electronics box with the steppers and motor drivers and a PC running XP and the use of a demo version of Mach3.
Waiting for some cheap parts from China which may not be to everyone's taste but generally half the price of UK parts for the same job but have already assembled a few mechanical parts.
I ran into a few problems getting the motors to drive and used this board and thanks to Tweakie have crossed that bridge.
I expect that there will be quite a steep learning curve with Mach3 so I'm sure I will be back.
Anyway, Hello everybody.
Re: New people welcome !! Come in here and introduce your self!
« Reply #1799 on: September 20, 2013, 12:45:23 PM »
Hey Fellas, is anyone in the Fort Worth area using this Mach3 on a regular basis?  I'm not a woodworker... I have patented some ideas and am trying to get them up and going.  I am brand new... as in hour and a half to watch 60 minutes brand new... as in 3rd grade was the best 4 years of my life brand new :) I have a shop, just bought an Industrial CNC, Artisan 408 Series, with high frequency water cooled spindle, 4x8 XYZ Axis) and am trying to get some programing done and would like some help.  Does anyone know where I can find such a person?  Thanks