3961
G-Code, CAD, and CAM discussions / Re: M11P1 and M10P1 problem...
« on: January 03, 2016, 10:52:56 AM »
You may need to contact the manufacturer of your DDCM6 to check but (like many of the chinese cards) as far as I am aware it does not support the M10 / M11 command set.
If you attach your .xml file I can check your set-up and may be able to suggest alternatives for correct laser operation.
Your .xml file is located in the Mach3 folder and is named <your profile>.xml (Typically Mach3Mill.xml). You will need to rename it to something unique (ie. Enrique.xml) to be able to post it (using the Additional Options tab).
Tweakie.
If you attach your .xml file I can check your set-up and may be able to suggest alternatives for correct laser operation.
Your .xml file is located in the Mach3 folder and is named <your profile>.xml (Typically Mach3Mill.xml). You will need to rename it to something unique (ie. Enrique.xml) to be able to post it (using the Additional Options tab).
Tweakie.