Messages

7251

General Mach Discussion / Re: Aluminum Bearing Block

« on: February 23, 2011, 08:31:27 AM »

Nicolas,

They will be related to your 'safe Z' setting either within Mach or the software you used to create the part.

Tweakie.

7252

General Mach Discussion / Re: New CNC Router Start up Problem

« on: February 23, 2011, 06:52:13 AM »

Just watched your video Nicolas - excellent work my friend.

Tweakie.

7253

General Mach Discussion / Re: Mach3 probe problem

« on: February 23, 2011, 05:34:52 AM »

Just a guess but if the Z axis DRO has not been zeroed (suppose it reads 50.0000) then the Z axis will go down to get to 5.0000 (or whatever your touch off standard distance is) rather than up.
Unless your probing routine takes care of the G90 / G91 then yes it will make a difference.
As Hood suggested post your VB and check that you have everything set correctly in the screen set.

Tweakie.

7254

General Mach Discussion / Re: Mill or Router - which is best for this application?

« on: February 23, 2011, 01:28:48 AM »

 

Tweakie.

7255

General Mach Discussion / Re: Mill or Router - which is best for this application?

« on: February 22, 2011, 12:01:12 PM »

YES YOU CAN MAKE A UNIVERSAL MOUNT ON YOUR Z AND JUST MAKE INDIVIDUAL LASER MNT AND SPINDLE MNT. ( QUICK CHANGE )
 WE CAN BUILD ANYTHING HERE.  WE HAVE EVERY MACHINE IN HOUSE TO BUILD MOST ANYTHING.

A quick change laser head ??

I would really like to see a picture of a 450Watt laser fitted to the Z Axis of a machine.

Do you know the price of a 450 Watt laser ?

Tweakie.

7256

General Mach Discussion / Re: Need help with basic understanding

« on: February 22, 2011, 04:24:38 AM »

That's great news Dan, looks like you are well on your way now.

Tweakie.

7257

General Mach Discussion / Re: CAM recommendation, other than CamBam

« on: February 22, 2011, 02:21:51 AM »

Rick,

I think all the software I use allows the 0,0 position to be set in the centre of the work as an alternative to the corners. On some jobs, such as your oval, it may be easier to mark the centre of the work and then set tool zero to this position.

Tweakie.

7258

General Mach Discussion / Re: Need help with basic understanding

« on: February 22, 2011, 02:06:49 AM »

The results are not really any better, OK the mis-allignment may be less but overall it is still a poor result.
IMO the reduction in the amount of error does tend to indicate that it is the belts/pulleys which are the main cause of the problem though.

Tweakie.

7259

General Mach Discussion / Re: Mill or Router - which is best for this application?

« on: February 21, 2011, 01:02:34 PM »

Hi Jen,

My 2 cents.....

Routers for wood and plastic, Miling machine for metals (and some plastics).
Ballscrews are best and if the router has a table larger than about 600mm x 600mm then servos are best. Three phase high speed spindle with VFD is best and good dust / fume extraction is essential.
Exact model and where to buy - that's another story.

Tweakie.

7260

General Mach Discussion / Re: CAM recommendation, other than CamBam

« on: February 21, 2011, 10:10:05 AM »

Sorry Guys, the confusion is all my fault.

You are both quite right, i don't have a use for Cut2D so I can delete this from my list. 

Tweakie.