2711
General Mach Discussion / Re: Install Problem
« on: May 19, 2017, 01:22:57 AM »
Changing the Active state of the Estop in Ports & Pins / Input Signals should do it.
It should be pointed out that because of the various and many problems associated with laptops using a parallel port this method of operation is not supported by Artsoft. You should be using an external motion controller (such as the ESS, etc.) with your laptop.
Tweakie.
It should be pointed out that because of the various and many problems associated with laptops using a parallel port this method of operation is not supported by Artsoft. You should be using an external motion controller (such as the ESS, etc.) with your laptop.
Tweakie.