Hello Guest it is March 28, 2024, 11:35:28 AM

Author Topic: LazyTurn  (Read 1362222 times)

0 Members and 1 Guest are viewing this topic.

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: LazyTurn
« Reply #740 on: January 05, 2009, 12:31:18 PM »
Hi Guys:


Thx,
Art ( Just keepign you informaed.. :)  )



Sounds like a plan to me, thanks, Art-  :)

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)
Re: LazyTurn
« Reply #741 on: January 05, 2009, 12:36:28 PM »
 ???
Tried to start the latest download, placed it into Mach3 directory with lazyturn installed but "ANN.dll not loaded"?

What can I do about this?

Kind regards,
Andre
Re: LazyTurn
« Reply #742 on: January 05, 2009, 12:42:15 PM »
Thanks Art

Sorry if my post disturb your way of thinking but i try to give a realistic image of what i think that turning is about.

Greetings:
Willem

Offline ART

*
  • *
  •  1,702 1,702
  • Tough as soggy paper.
    • View Profile
Re: LazyTurn
« Reply #743 on: January 05, 2009, 12:45:28 PM »
Hi:

 If ann.dll is not found, then you havent installed the LazyCam update before trying LTurn. Download the LCam update file and install that first.

thx
Art
Re: LazyTurn
« Reply #744 on: January 05, 2009, 01:16:45 PM »
 >:(Art,

Can you upload the update file to my emal adress.
The normal download from the site remains faulty.

Kind regards,
My email address is ahroest@xs4all.nl
Re: LazyTurn
« Reply #745 on: January 06, 2009, 01:16:01 PM »
Unfortunately is it impossible to download a working lazycam update from this site and therefore it is also impossible to use lazyturn since he misses ANN.dll

Can somebody help me by mailing a working file???

ahroest@xs4all.nl

Kind regards,
Andre

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: LazyTurn
« Reply #746 on: January 06, 2009, 02:22:23 PM »
I just checked it and it's working just fine. Possibly give it another try?

http://www.machsupport.com/downloads/LazyCam3.00.2_Update.exe

Also sent to your email-

Dave
« Last Edit: January 06, 2009, 02:26:56 PM by budman68 »
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: LazyTurn
« Reply #747 on: January 06, 2009, 02:39:03 PM »
Hi, Andre

I emailed the update to you a few min. ago, You'll need to rename the file I sent you.

Hears the ANN.dll Zipped up, You may be missing more than that though.

Chip
Re: LazyTurn
« Reply #748 on: January 06, 2009, 04:28:37 PM »
Hi Art

A was thinking (i do sometime), if i use a diamant of 30 degree (for example) and i would use the same feedrate in X an Z direction the tooltip Will not like to cut in X direction because the force on the tooltip is to big in relationship to the Z direction.
On the other hand, if i use a grove tool the force relationship is in the opposite direction.
What i try to say that it is almost unavoidable to give tools a parameter table (what the program can work with) if we want to use a tool in the most useful way.

Greetings:
Willem

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: LazyTurn
« Reply #749 on: January 06, 2009, 05:36:11 PM »
Willem,
Can you explain more about the parameter table / what you mean?
RICH