1251
HiCON Motion Controller / Re: MPG Hand-Wheel-Controller Best Recommendation for Hicon Integra
« on: May 30, 2019, 06:19:45 AM »Quote
Press the enable button on side of controller (whilst axis selector is in off position) ======= P14 2 lights upmeans MPG0 Inc is selected
Quote
Press the enable button on side of controller (whilst axis selector is in x position) ======= P14 1 & 2 lights up at same timemeans MPG0 X and MPG0 Inc is selected
Quote
Press the enable button on side of controller (whilst axis selector is in y position) ======= P14 2 & 3 lights up at same timemeans MPG0 Y and MPG0 Inc is selected
Quote
Press the enable button on side of controller (whilst axis selector is in z position) ======= P14 2 & 5 lights up at same timemeans MPG0 Z and MPG0 Inc is selected
Quote
Press the enable button on side of controller (whilst axis selector is in 4 position) ======= P14 2 lights upmeans MPG0 Inc is selected but MPG0 A is not selected -> Looks like wiring problem
Quote
Press emergency stop button ======== P14 10 lights upmeans E-Stop button is wired correctly but is is not assigned at the Moment we will have a look for this later
Quote
Turn wheel clockwise ===== P14 9 Flickersmeans the turn wheel seems to bee connected correct
Turn wheel anticlockwise ===== P14 8 Flickers
Quote
Turn left black knob (OFF x Y Z 4) ======= nothing happens
Turn right black knob (x1 x10 x100) ======= nothing happens
i think you have to press the enable button hold it and turn the knob to see P14 1..x seen changing.
i also think you have to press an hold enable button during Operation.