Messages

751

General Mach Discussion / Re: Another THC problem

« on: November 13, 2020, 03:11:35 AM »

Hi,
witch Motion Controller are you using? THC is only working on a few Controllers.

752

General Mach Discussion / Re: Mach 3 Screen Lockout Buttons/Customize

« on: November 13, 2020, 02:33:26 AM »

have you tryed the Operator -> Lock and Operator -> Unlock ?

this is only for menuu functions, the rest Needs to be done with a customized screenset.

753

General Mach Discussion / Re: How to run same file in different G55-G59 offsets?

« on: November 13, 2020, 02:28:54 AM »

have a look here:

https://www.machsupport.com/forum/index.php?topic=43838.msg281917#msg281917

https://www.machsupport.com/forum/index.php?topic=7684.0

754

General Mach Discussion / Re: Very Slow Feed Rate

« on: November 13, 2020, 02:21:32 AM »

the code for Z axis would be

metic -> G1Z-100 F100 should take 1 Minute
imperial -> G1Z-10 F10 should take 1 Minute

drive the z axis all the way up and Zero it

pls post screenshots of motortunig Windows off all three axis and we will see.

755

General Mach Discussion / Re: Very Slow Feed Rate

« on: November 12, 2020, 06:02:46 AM »

for a simple test use MDI Input

metic -> G1X100 F100 should take 1 Minute
imperial -> G1X10 F10 should take 1 Minute

if x axis is at 0 when You start

756

General Mach Discussion / Re: DIY CNC with ClearPath Servos

« on: November 07, 2020, 02:31:19 AM »

try to reduce the P (or gain) sorry dont know the wright english word, of the Motor on the clerpath.

757

German / Re: Mach3 mit USB-Steuerungplatine Probleme

« on: November 05, 2020, 03:01:30 PM »

Hallo Dieter,
wollte nur mal nachfragen, wie der Stand der Dinge so ist.
Gruß Tom

758

German / Re: Probleme beim einrichten der Spindel

« on: November 05, 2020, 02:59:12 PM »

Spät aber dennoch, schön zu hören das es geht.
Gruß Tom

759

Mach3 under Vista / Re: Scripter Compile Error

« on: November 05, 2020, 05:43:02 AM »

Yes that is correct.

760

VB and the development of wizards / Re: Unknown Word starting with a , Block

« on: November 05, 2020, 01:29:43 AM »

can you explain what you want to do.
might be easier to get a solution.