Show Posts

1771

General Mach Discussion / Re: Mach3 thinks it's moving Z from THC but Torch height unchanged

« on: January 05, 2007, 02:40:49 PM »

Cool, looks like one of your girls in the pic has an anger problem

Happy cuts
Brian

1772

General Mach Discussion / Re: Cabin Fever

« on: January 05, 2007, 07:46:33 AM »

Don't know at this time but I will post here to tell you

1773

Show"N"Tell ( Your Machines) / Re: Eagle KM-750..Anilam Crusader GX-M

« on: January 05, 2007, 07:44:46 AM »

I changed out the drives and motors because i wanted the mill to run everytime I wanted it. Not to say that I can't have made the brush motos work but I just wanted to have a good machine that I could cut and not muck with. TI cost me about 1300 and axis for the drive motor and cables per axis and if you have been making parts you know that is not that much money for something that you need to have running all the time. On the other hand if you are at home and making things for fun OR you just like to work on things... Get some parts and see how cheap you can get it to run

I have done that in the past and had a great time working and learning

What every you do please keep the 400 IPM

1774

Show"N"Tell ( Your Machines) / Re: Eagle KM-750..Anilam Crusader GX-M

« on: January 04, 2007, 07:10:58 AM »

I have a mill that is just about like yours

I wish the head of mine was like that but the base is the same. I put AC brushless servos on the mill, man is that thing FAST! It is 1.34 Hp per axis and I took the belts off the X and Y axis. I get about 500IPM and it will move a .00002 inc (only based on the Encoder,Didn't check to see if it was true). I also got a 10" 4th axis for it

Nice mill, I think you are going to be happy with it!

1775