Messages

1591

LazyCam (Beta) / Re: Lazycam arcs output bug ?

« on: February 07, 2007, 06:09:31 PM »

This is a problem, People have a VERY hard time seeing what direction is positive and what is negitive... this will change the direction of the Arc. I will have a look at it and see that we have it going the right direction...

1592

VB and the development of wizards / Re: OEM DROs in Wizards

« on: February 07, 2007, 06:06:43 PM »

You did well to find that one!!

Thank you for the help
Brian

1593

General Mach Discussion / Re: XZ plane arc bug ?

« on: February 07, 2007, 06:05:13 PM »

What Rev are you running?

1594

General Mach Discussion / Re: homing slaved motors

« on: February 07, 2007, 05:59:26 PM »

Check to see that you have the same homing %speed and that you have the Homing turned on for the B axis

1595

General Mach Discussion / Re: Spindle Calibration Function?

« on: February 07, 2007, 05:58:16 PM »

+- 40 is a big swing... you should hear that! I am with Hood, I think you are getting some false readings

1596

General Mach Discussion / Re: PLC relays wont latch

« on: February 07, 2007, 05:56:27 PM »

Sometimes you just get lucky and things work...   

1597

General Mach Discussion / Re: Mach to DeskCNC?

« on: February 06, 2007, 05:54:25 PM »

Yup that should help...

1598

General Mach Discussion / Re: Mach to DeskCNC?

« on: February 06, 2007, 04:52:54 PM »

Change the time length of the moves. If you send longer moves I think it will fix your problem

1599

General Mach Discussion / Re: New PlugIn

« on: February 06, 2007, 04:50:13 PM »

It is only 3 axis at this time But I think I can add a 4th axis... The external button is not going to be simple I will think about that one, somhow I have to pass that the Key has been pressed from Mach3

Thanks
Brian

1600

General Mach Discussion / Re: PLC relays wont latch

« on: February 06, 2007, 04:46:59 PM »

Hood, you should post and tell everyone how you fixed the problem