Messages

2261

General Mach Discussion / Re: hows this for a beginner

« on: September 05, 2006, 09:42:06 PM »

Could you please try Mach3 and tell me how that works for you...

2262

General Mach Discussion / Re: How do I determine which Limit Switch is Triggered?

« on: September 05, 2006, 08:56:44 PM »

Index is for the index pulse in Mach3 and the rest of the inputs are done with the Debounce Interval

2263

G-Code, CAD, and CAM discussions / Re: g-code verifying

« on: September 05, 2006, 08:49:43 PM »

The 3d graphic's in mill take  more CPU If it was a bit less we could show 3d solids on the screen!

2264

General Mach Discussion / Re: Feedrate really slow when running a line with G43

« on: September 05, 2006, 08:43:21 PM »

Try putting a G00 on the same line as the G43. It should be going at G00.. that is odd

2265

General Mach Discussion / Re: How do I determine which Limit Switch is Triggered?

« on: September 05, 2006, 08:41:02 PM »

Hello Mike,
Did you try setting a debounce for the inputs? try putting in about 1000 - 2000 that should do it..

2266

General Mach Discussion / Re: Feedrate really slow when running a line with G43

« on: September 05, 2006, 08:12:16 PM »

There should not be a move when you do a G43... G43 is a tool length offset...

2267

General Mach Discussion / Re: Optical limit switch question

« on: September 05, 2006, 08:10:58 PM »

That shoudl work... I have never done that so please tell us how it works if you do it

2268

G-Code, CAD, and CAM discussions / Re: g-code verifying

« on: September 05, 2006, 06:59:35 AM »

I use the tool path window to verify my program...  The verify programs are used on the large CNC mills that you can't see the tool path on But if you like to use it be my guest, we, all like to run the programs our own way.

2269

LazyCam (Beta) / Re: Update LC without Mach

« on: September 04, 2006, 10:44:10 PM »

You can't at this time

2270

General Mach Discussion / Re: Tool measure macro

« on: September 04, 2006, 10:43:19 PM »

Well I think I have found the problem that may be making the macro not pause... There is a new version that will be coming out D1.90.081 please try your macro with that after it is out