Messages

2621

LazyCam (Beta) / Re: X Axis Wrap

« on: July 08, 2006, 10:09:08 PM »

This has not been scheduled to be worked on at this point   I am working on offset path as I have time... other then that there is not much that will be changing in Lcam

2622

Newfangled Solutions Mach3 Wizards / Re: Multiple Circular Pockets?

« on: July 08, 2006, 07:30:54 PM »

I have sent you an Email off list

2623

LazyCam (Beta) / Re: LazyCAM 2.56 MachManIP MFC Errors

« on: July 08, 2006, 05:11:20 PM »

Could you send me the file and tell me what you are entering for a depth and a pass depth?
Thank you
Brian

2624

General Mach Discussion / Re: Interfacing a Plasma THC into MACH3 \ Ok To Move

« on: July 08, 2006, 01:31:08 PM »

The debounce is under config logic.. sorry about that


If you put the controle in THC mode Input one is the good arc signal This I think will do better then the safety lock out.

2625

General Mach Discussion / Re: Laptop problems??

« on: July 08, 2006, 10:43:40 AM »

Get a PCI printer port and you should have no trouble should be from $10 - $20 USD

2626

General Mach Discussion / Re: Java chat

« on: July 07, 2006, 10:53:06 PM »

It is not used that often sorry... it is used to help people from time to time

2627

LazyCam (Beta) / Re: cant open a dxf file on licensed version??

« on: July 07, 2006, 08:58:20 PM »

It should open it.. if you would like to send it to me I will check it

2628

General Mach Discussion / Re: ugly circles

« on: July 07, 2006, 08:57:10 PM »

The only way you can get what you are seeing is if you have backlash... put and indicator on your axis and set the axis to zero. now jog away from the indicator and type G0 X0 into the MDI window. did the indicator go back to zero? If it did go back to zero jog the axis into the indicator and do the same G0 X0 in the MDI window. Did that give you zero?

That is just the first test...

I think you should try MAch3 with Sherline mode. this will tell us if your drivers are having trouble


There are a few more things that we can test after that

2629

General Mach Discussion / Re: Should I purchase Mach2 or Mach3?

« on: July 07, 2006, 08:50:13 PM »

You can install both on the same computer and the license works for both of them

I think you should use 3 because there is so much more support and the software is more stable!

2630

General Mach Discussion / Re: ART! Can i buy a licence for mach 4?

« on: July 07, 2006, 08:47:55 PM »

I sent the message to Art