Well I don't know who of you are going to Cabin Fever, but if you are going please stop by and say Hi I will be the guy sitting in a chair watching the CNC router run all over the place (Quantum ).. I also will have my computer with a burner there if you need to get a CD of Mach3 (better then slow Internet). There will be no charge for that but I can tell you that I will only have 50 of them with me... Also if you need to buy a license file I could set you up with a show special I will know better what that will be when the big day hits.

I will also be giving a talk on Mach3 and cnc in general. I could care less if you would like to talk about Mach3 or not, If you would like to know more about stepper motors,servo motors and how to wire a machine.. Cool that is good for me Art and I do this every time we go to a show... But if you fill the hour with Mach3 questions that is good too;) If you do have a mach3 question I will be running the router at the table and could tell/show/teach you stuff about the program and the wizards.

So IF you have an idea what you would like to see at the show please pipe up and I will try to make it happen

Thanks
Brian


BTW here is the link to the show http://www.cabinfeverexpo.com/

See you there Benny 

Was wondering if yall were gonna be at any other locations this year,York is a pretty good drive from Huntsville,Al.

Don't know at this time but I will post here to tell you

Hey, according to my map Huntsville to York is about 770 miles. For us its almost 670  miles from Maine to York. Sometimes you gotta drive a few miles for good stuff. :-)

Hi Brian

   I am new to the forum so let me introduce myself. My name is Sam Harbold and my wife and I own and operate a small custom millwork shop approx 20 miles northeast of Baltimore, MD.  I have a Shopbot that was purchased in March of 1999.  I am just starting to do a major overhaul of the machine and once complete plan on switching over to Mach software.  I was glad to see you are going to be in York, PA. I look forward to meeting you and seeing the software in action.  My plans are to attend the show on Saturday.

Sam

Cool Sam!

I will be there but you may not pick out the right guy I am the one that looks like he just rolled out of the hills...

Take it, that a safe bet your not going to trim your wiskers for the event 

I clean up well

I just happen to be doing some service work in Scanton PA. I would have loved to drive down to the expo. But I'm a week too early and go back to Wisconsin friday. 

Hello Sam,

I just did a major overhaul to my cable driven 1997 ShopBot PR, the only thing left from the original machine is the uni-strut frame.
My new controller the Ascension 1000 from Custom-CNC uses Mach3 software and I would never turn back.
If you have any questions about my build please fell free to ask away.

Hello Brian,

I hope to make it to the show if business allows it,(it's about a two hour drive )and look forward to meeting you.

Tom