Messages

1321

Show"N"Tell ( What you have made with your CNC machine.) / Re: Derby Covers

« on: April 09, 2007, 07:16:19 AM »

That is VERY cool

1322

G-Code, CAD, and CAM discussions / Re: regarding z axis jog while running

« on: April 09, 2007, 07:11:01 AM »

Yes, you will need to connect them to the two phisical THC Up/Dn Lines.
Please contact the maker of your THC unit for help with this

Thanks
Brian

1323

General Mach Discussion / Re: servo drive connection

« on: April 09, 2007, 07:07:15 AM »

Send a Message to the user Hood, he is Scotland and may be able to help you.

1324

General Mach Discussion / Re: servo drive connection

« on: April 09, 2007, 12:33:00 AM »

You will need a step and direction to +/- 10V converter to run the Amps.. There are a few that you can get and I don't have a link to them A few of the guys here have used them in the past and I think they will tell you more.
Thanks
Brian

1325

General Mach Discussion / Re: Macropump help

« on: April 08, 2007, 06:41:56 PM »

Or you can set an OEMtriger to do that... you need to set the OEM code under the System Hotkeys and I think you are going to need number 1021 for a reset.. (Found on the Wiki)

1326

General Mach Discussion / Re: G75 Request

« on: April 08, 2007, 06:37:44 PM »

Not at this time We think that it should be done in Cam as we can take very large files

1327

G-Code, CAD, and CAM discussions / Re: regarding z axis jog while running

« on: April 08, 2007, 06:35:00 PM »

The Only way that you can have both is to  hook your "override" buttons up in parallel to the inputs for the THC. That should work...

1328

General Mach Discussion / Re: Jogging Z axis while machine is cutting

« on: April 07, 2007, 10:21:30 PM »

On the Milling tab under ports and pins you need to turn on Enable Zup and down with out THC active. That should fix the problem

1329

Show"N"Tell ( Your Machines) / Re: Bridgeport Series 1 control panel

« on: April 07, 2007, 09:28:10 AM »

If you would like to post the screen set we can add it to the downloads page

It is VERY sweet!

1330

General Mach Discussion / Re: newfangled problem

« on: April 07, 2007, 09:24:42 AM »

There is no fix at this time for that problem... I will send the report to Ron and see what we can do about it.