Messages

3381

General Mach Discussion / Re: Ahha driver and Mach 3

« on: March 19, 2006, 08:39:31 AM »

Is it a 37pin on the RC500? If so it should be the same cable...

3382

General Mach Discussion / Re: M3 D1.90.018 Backlash Units

« on: March 19, 2006, 08:38:06 AM »

Good work!

3383

General Mach Discussion / Re: USB Control

« on: March 19, 2006, 08:37:09 AM »

I see That is from the very old Mach G2000 project that is now the Grex. The Grex runs over a network connection now...

3384

General Mach Discussion / Re: M3 D1.90.018 Backlash Units

« on: March 18, 2006, 06:00:43 AM »

What are you useing for settings? and did you turn it on

3385

General Mach Discussion / Re: cnc4pc

« on: March 18, 2006, 05:59:05 AM »

There are a few others here that have used the PC4CNC stuff.. So we know it will work in the end
If you post your XML I can take a look and see if there is anything that I can do to help you.

BTW I am going to be out for the day cutting trees, but I will get back to you as soon as I get back in

3386

General Mach Discussion / Re: USB Control

« on: March 17, 2006, 07:36:12 PM »

Sam where is that??

3387

General Mach Discussion / Re: Home/Limit referencing.

« on: March 17, 2006, 07:33:36 PM »

Check this out and see if it helps...
http://machsupport.com/forum/index.php?topic=314.0

3388

Mach3 and G-Rex / Re: The future!

« on: March 17, 2006, 07:29:33 PM »

I know it is going to be at least 50.00.... But that is up in the air and you know Art it will not be big money!

3389

Mach3 and G-Rex / Re: G100 and printer ports?

« on: March 17, 2006, 07:27:32 PM »

Should be no problem

3390

LazyCam (Beta) / Re: Lazycam acting crazy

« on: March 17, 2006, 09:39:48 AM »

I have to finish the excellon first I am going to try to get that out tonight