Messages

1811

VB and the development of wizards / Re: Available serial commands?

« on: December 29, 2006, 11:26:42 PM »

Nope

1812

General Mach Discussion / Re: Rotary and linear axis not moving together in automatic mode.

« on: December 29, 2006, 11:20:05 PM »

The A axis is not in the drill cycles

1813

General Mach Discussion / Re: motor setup

« on: December 29, 2006, 11:18:50 PM »

you need to run the driver test and see if you see a graph that looks like a nice flat line... (To run the driver test you must have mach3 closed)

1814

General Mach Discussion / Re: Small hobby CNC routers

« on: December 29, 2006, 11:16:52 PM »

There are many people here that have done the same thing and will be a great help I will try to help as well 

1815

General Mach Discussion / Re: still having trouble with Arc Radius and cutter radius

« on: December 29, 2006, 11:09:09 PM »

enter the tool dia that you would like to use into the Dia dro on the settings page. You also need to have the dia set for the right tool number... Look up the G41/G42 and tool table for more info.

Thanks
Brian

1816

General Mach Discussion / Re: Sound Logic Encoder Interface anyone?

« on: December 28, 2006, 01:30:46 PM »

It is on the list to be worked on soon.. I have an OEM that I have to finish working on but after that I think I am going to be good to start working on it

Would you like to test it ?

1817

General Mach Discussion / Re: NOTEBOOK PARALELL PORT CARD

« on: December 25, 2006, 03:19:55 PM »

You are better off to go with the NCPOd from http://ncpod.oemtech.com/  This will make it so you can run from a USB port

1818

Feature Requests / Re: Well, it IS X-mas ...

« on: December 25, 2006, 08:56:13 AM »

I think it should call me wife and ask her to change the tool  and set the tool length;)

I will have to write this up as an Auto tool changer with Tool length Probe   

Good thing she never reads this 

1819

G-Code, CAD, and CAM discussions / Re: g92 Proper Use Of with M98, M99 ?

« on: December 25, 2006, 08:52:31 AM »

G52 is a much better way to go

In the Fanuc's you can't have both G92 and Fixture offsets at the same time... So please stick to the Offsets and all will be good

1820

General Mach Discussion / Re: random number on dro

« on: December 24, 2006, 10:37:36 PM »

There is a setting under the Configs that will set the DRO's to zero on startup...


Hope that helps
Brian