Messages

1501

General Mach Discussion / Re: Restart issue + jogging question

« on: March 01, 2007, 10:36:21 PM »

To pause the program you need to FeedHold not stop.

1502

General Mach Discussion / Re: Laptops and ports

« on: March 01, 2007, 10:34:51 PM »

It will not work

Thanks
Brian

1503

Mach3 and G-Rex / Re: Mach 3 Plug-in and Grex Current status.

« on: March 01, 2007, 07:28:15 AM »

I wanted to post that after talking to Art he thinks that the G100 is looking better then ever! Steve is working on the DDA's to link the Arcs and lines in the G100 Lib, after that it should be at a point we can start testing the G100 on the mills here at the shop.

I will post here after I test the new software.

1504

LazyCam (Beta) / Re: LCAM posting with Plasma mode as the default

« on: March 01, 2007, 07:22:34 AM »

Did I fat finger PLASMA... I will have a look!

1505

General Mach Discussion / Re: Works in KCam, Not working in Mach3

« on: March 01, 2007, 07:17:42 AM »

The G201's can have a step pulse that is only 5us long... that is FAST!

1506

General Mach Discussion / Re: Another G-Code Loading Problem

« on: February 28, 2007, 08:48:23 PM »

G91.1 will set the acrs to Inc for that one file... I did that so you would not say "My arcs are not right" if you had ABS arcs...

it will not change the settings in mach3

1507

General Mach Discussion / Re: hello everybody - motor drive question

« on: February 28, 2007, 09:18:44 AM »

We can change that as needed... There is not standard! so make it as simple as you can and it will work great..

1508

General Mach Discussion / Re: Another G-Code Loading Problem

« on: February 28, 2007, 09:11:47 AM »

Looks to me like you need to move your license file over to your mill

And Yes mach3 and Lcam will do Arcs if they are in your drawings... HPGL's don't have Arcs...

1509

General Mach Discussion / Re: Works in KCam, Not working in Mach3

« on: February 28, 2007, 09:03:28 AM »

What are you running for drives? Need to keep a list in my head that have slow opto's....

1510

General Mach Discussion / Re: motors chatter

« on: February 28, 2007, 09:01:56 AM »

It is all power saving in a computer and laptops change the voltage going to the processor all the time (Changing the speed). So as the load on the computer changes your pulse stream will change (Not a simple problem).

You will have no problem with a good desktop