Messages

1921

General Mach Discussion / Re: OEM Buttons Description

« on: November 29, 2006, 12:05:51 AM »

Just checked and there is no OEM code for that

sorry
Brian

1922

LazyCam (Beta) / Re: Pimp my Lcam

« on: November 29, 2006, 12:03:10 AM »

Sid that is all I am getting you this year 

1923

Mach3 and G-Rex / Re: Grex & MPG's

« on: November 28, 2006, 08:27:39 AM »

They are changing the firmware and we have stopped working on it till they are finished. Once they have finished we can get them working (it is not you)

Thanks
Brian

1924

Newfangled Solutions Mach3 Wizards / Re: Reclangular Pocket positioning question

« on: November 28, 2006, 08:25:38 AM »

be sure to press enter after you type in the data... you would not be the first one to have that get you 

1925

G-Code, CAD, and CAM discussions / Re: G84 Canned RH Tapping Cycle

« on: November 28, 2006, 08:23:49 AM »

You would have to do your own macro for a rigid tap but floating is working

1926

VB and the development of wizards / Re: Adding Other VB Controls

« on: November 28, 2006, 08:21:22 AM »

download the code for the winder and you will be able to edit the code to make it work

1927

General Mach Discussion / Re: Denford Triac ATC - guidance on updating to Mach3(?)

« on: November 28, 2006, 08:17:30 AM »

BT35, I have a friend that has a few of the holders, but they are for his mill

Best of luck and good to hear you got it in the door !

1928

General Mach Discussion / Re: Coolant not working after upgrade

« on: November 28, 2006, 08:15:13 AM »

sounds like you need to start checking with the meter

1929

General Mach Discussion / Re: OEM Buttons Description

« on: November 28, 2006, 08:12:46 AM »

I see If you can tell the OEM button number that will do what you would like but on an other axis that will make it soI can code it in. So lets say it is the x axis and you would like to zero it out, what OEM code are you using?

Thanks
Brian

1930

General Mach Discussion / Re: OEM Buttons Description

« on: November 27, 2006, 03:43:00 PM »

should be 1011