Messages

1991

General Mach Discussion / Re: New CV features

« on: November 17, 2006, 08:55:51 AM »

No problem! I think that I should do a video on CV at some point... that has been a question that I have had many phone calls over ...

1992

General Mach Discussion / Re: We need Linux port

« on: November 17, 2006, 08:54:13 AM »

O boy that can NEVER happen! mach3 IS a windows program and that will never change THere is just no way to move all the messages that mach3 needs over to linux.


Sorry I think that Linux is best left to the EMC Guys and 259.00 is still about as cheap as you are ever going to get for a CNC machine! I run toos that are 500.00 on control that cost me 159.00
(Sorry I didn't pay for it  )

1993

General Mach Discussion / Re: Version 2.0.009 Mach3Turn Diag screen Enable 1 LED always on

« on: November 17, 2006, 08:48:17 AM »

Enable should be on all the time... the only time that it should turn off is when you are not Reset (estop mode)

1994

General Mach Discussion / Re: PID motor tuning

« on: November 17, 2006, 08:45:11 AM »

Nope
VB will only run at about 4 times a sec ...

Sorry
Brian

1995

General Mach Discussion / Re: New CV features

« on: November 15, 2006, 08:51:02 PM »

This will tell Mach 3 how far back to start the blending from one move to the next... It could be less but will never be more then that.

Is that any help?

1996

VB and the development of wizards / Re: Macro Controlling Multiple Outputs

« on: November 14, 2006, 07:40:06 PM »

No problem Looks like you are getting it!

1997

LazyCam (Beta) / Pimp my Lcam

« on: November 14, 2006, 07:35:36 PM »

So LCam is on the chopping block It is getting taken down and redone to simplify the code in it.. We are in hopes that this will make for a better base code that we can build on.

SO please post any bugs that you like but know that changes they are a coming 

Thanks
Brian

1998

VB and the development of wizards / Re: Macro Controlling Multiple Outputs

« on: November 14, 2006, 07:28:54 PM »

DeActivateSignal(Output3)  That will do it 

1999

General Mach Discussion / Re: Vista support

« on: November 14, 2006, 07:26:27 PM »

Yup
Can you say Plug In 

2000

General Mach Discussion / Re: parts/cycle counter

« on: November 14, 2006, 07:22:53 PM »

Nope, not at this time...