Messages

1191

Forum suggestions and report forum problems. / Re: sympton and cure section

« on: May 08, 2007, 09:33:21 AM »

You need to get Rev 2.00.06X and it will fix your problem...
or it could be a problem with your license file... if you would like you can send me your license file offlist ans I will test it with the license generator.Please mail your license file to "license AT machsupport.com" and I will help you with the problem.

Thanks
Brian

1192

LazyCam (Beta) / Re: LCam failed to initalize

« on: May 07, 2007, 10:46:16 PM »

Sorry I forgot to put that you may need the .net stuff

Sorry about that guys!

Brian

1193

LazyCam (Beta) / Re: pocket with islands

« on: May 07, 2007, 10:44:44 PM »

 I think you get the prize for the best pocket done with lazyCam up to this point

Keep up the great work!
Brian

1194

General Mach Discussion / Re: servos not traveling proper distance, new install of 2.0

« on: May 07, 2007, 10:39:52 PM »

sounds to me like you have some PID loop tuning that you need to do

1195

General Mach Discussion / Re: GCode to send Axis to home limit switches?

« on: May 07, 2007, 10:28:13 PM »

G28.1 should home the axis...

1196

LazyCam (Beta) / Re: Lcam 2.0...

« on: May 07, 2007, 09:51:55 PM »

problem has been found and i sent it to Art will be in the next rev
Thanks
Brian

1197

LazyCam (Beta) / Re: Lcam 2.0...

« on: May 07, 2007, 09:21:38 PM »

Yup, that is junk data that you are getting for K...

I will see if I can find the problem

Thanks
Brian

1198

LazyCam (Beta) / Re: Trouble with images...

« on: May 07, 2007, 06:28:13 PM »

Yup my bad

I will fix it today!

1199

LazyCam (Beta) / Re: Trouble with images...

« on: May 07, 2007, 09:10:38 AM »

I think that is my bad in the posting class

I will have a look at it today!

Thanks for the bug

Brian

1200

General Mach Discussion / Re: Mach 3 launching media player as z axis movement

« on: May 07, 2007, 09:03:43 AM »

You guys need to see if you have some junk on your computer that is making it do that... I can tell you that we are not opening any files other then the ones in the Mach3 directory and the Gocde file that you are looking to open..

As for the MediaPlayer... could you check and see that you have the wav files disabled under the general configs?