Messages

2681

LazyCam (Beta) / Re: New problem after G80

« on: June 28, 2006, 06:09:36 PM »

I will put in a fix for the G01's after the G80's

To pan and zoom press the shift or Crtl button & hold down the left mouse button When you move the mouse the view will change...

To use cutter comp you need to have G41/G42 turned on under the posting options.. The leadin size must be greater or = to the tool Dia. The tool Dia also needs to be in the tool table in Mach3...


Thank you
Brian

2682

General Mach Discussion / Re: Need help regarding the tool offset??

« on: June 28, 2006, 06:03:48 PM »

The best way to start doing this is to offset your path in the Cam software... The other way is to use Cutter comp (G41,42). you can find info on this in the Mach3 manual

If you need help we are here
Brian

2683

VB and the development of wizards / Re: Calling a specific Wizard

« on: June 28, 2006, 02:34:29 PM »

call loadwizard("Cut Arc") would open the Cut Arc wizard

2684

General Mach Discussion / Re: Modbus

« on: June 28, 2006, 02:23:33 PM »

I am thinking about the 10/100Base-T Ethernet and the PCI

2685

VB and the development of wizards / Re: External program called from VB Script

« on: June 27, 2006, 07:31:48 PM »

There is a way to send keystrokes from VB... do you think that would help? Other than that there is no way to move the data...
Sorry
Brian

2686

LazyCam (Beta) / Re: LC 2.54

« on: June 27, 2006, 07:29:26 PM »

Thank you I will have a look
Keep up the good work!
Brian

2687

LazyCam (Beta) / Re: Another suggestion

« on: June 27, 2006, 07:25:31 PM »

Would you like a button to turn it any angle

2688

General Mach Discussion / Re: Slider and touc hscreen problem

« on: June 27, 2006, 07:22:48 PM »

I will pass this on to Art

2689

General Mach Discussion / Re: My new Machine...

« on: June 27, 2006, 07:21:30 PM »

Please be sure to watch the video's

2690

General Mach Discussion / Re: Newbie needs some info/help

« on: June 27, 2006, 07:19:52 PM »

Did you find the video's, Wiki and manuals for Mach3 ?? They are here: http://www.machsupport.com/artsoft/support/support.htm