Messages

3191

General Mach Discussion / Re: X-Axis stutters when moving X &Y with Cursor-keys

« on: April 19, 2006, 08:07:37 AM »

You Got me That is all I did... Other than the fact that I looked for any odd settings.

So you are good to go now?

3192

General Mach Discussion / Re: Eureka I'm Cutting

« on: April 19, 2006, 08:03:04 AM »

Great I am happy to see that you are happy and making chips 

Happy cutting!
Brian

3193

General Mach Discussion / Re: File system for clean install of WinXP

« on: April 19, 2006, 08:01:44 AM »

I do Fat32 but that is just me...

3194

Show"N"Tell ( Your Machines) / Re: Got My mill running :)

« on: April 19, 2006, 08:00:42 AM »

They are max RPM of 3000 at about 5N-m (44.5 In-Lb) with a MAX 16N-m (133 In-Lb)

3195

Show"N"Tell ( Your Machines) / Re: Got My mill running :)

« on: April 18, 2006, 07:36:15 PM »

I did a few more tests at 200IPM on some very small parts I can tell you that the newer version of Mach4 is going to do MUCH better! I am sitting down to draw out a test Gcode file for the Grex now and after that I will have a base for all the testing that I am going to be doing  As soon as i am done with the Gcode file I will post it here so you can test your Mach3 mills on it ...

3196

General Mach Discussion / Re: mach2 and G76

« on: April 18, 2006, 07:30:42 PM »

this one should fix everything..

3197

General Mach Discussion / Re: mach2 and G76

« on: April 18, 2006, 07:19:58 PM »

So I cn fix the spindle but what you are telling me is that the Jog is not working for the Z axis... That is odd... I think you need to change the axis jog keys and you will be all set Now for the Z axis being the wrong way I can fix that! Spindle should be working and I will have a look at that too

3198

General Mach Discussion / Re: USB - Parallel laptop

« on: April 18, 2006, 07:15:30 PM »

Look forward to working with you!

3199

General Mach Discussion / Re: X-Axis stutters when moving X &Y with Cursor-keys

« on: April 18, 2006, 07:09:56 PM »

Here is the first test...

3200

LazyCam (Beta) / Re: G-code file generation bug

« on: April 18, 2006, 06:59:13 PM »

Okay I have it on the list.
 thank you Brian