Messages

2281

LazyCam (Beta) / Re: LazyCam ver 2.64 and G(Mode) generation of G41, G42

« on: September 04, 2006, 09:58:09 AM »

There was an othe that said it was reversed so I changed it.. now it needs to go back.. I think I need to look deeper into this

2282

LazyCam (Beta) / Re: LazyCam ver 2.64 and Redundent Line Removal

« on: September 04, 2006, 09:56:09 AM »

I don't think it is working anymore... I will have a look at it at some point.

Thanks chip

2283

General Mach Discussion / Re: New PlugIn just about done..

« on: September 04, 2006, 09:47:46 AM »

For you I think I can add i t:)

Look under config plugIn and click on the yellow config button for the shuttle pro. This will open up the settings for the shuttle pro

Also if you would like to change the jog Inc press the tab key in Mach3 and change the jog inc.


Thanks
Brian

2284

General Mach Discussion / Re: Jerked operation when executing tool change macro

« on: September 04, 2006, 09:44:24 AM »

The Macro's are very hard on the CPU   you are well under anything I have ever tested...

2285

General Mach Discussion / Re: Differents between MACH2 and MACH3

« on: September 04, 2006, 09:37:22 AM »

What is it for a computer ?

Thanks

2286

General Mach Discussion / Re: Total novice asking for help

« on: September 04, 2006, 09:18:08 AM »

You wi,,, need to use the Pport

Bob cad is okay but it will not open Gerber files Mach 3 has LCam that will open gerber file to get you started.. after that you can do what you like

Many people ue mach3 and gecko drives.. there are may breakout boards and they have links off the Artsoft Links page.

Have fun
Brian

2287

General Mach Discussion / Re: Making an Input do Something

« on: September 04, 2006, 09:12:24 AM »

under Config / system Hot keys enter 1001 into the 1 OEM code edit box. now you need to go to the ports and pins page and set the input to OEM triger #1  There is info in the Wiki that should tell you what number to enter into the OEMcode edt box.

Hope that helps
Brian

2288

General Mach Discussion / Re: Still do not understand "GO TO" button operation

« on: September 04, 2006, 09:07:11 AM »

to go is Distance to go this will tell you howmuch the axis needs to move to finish a move when you are running a program.

hope that helps
Brian

2289

Mach3 and G-Rex / Re: G100/Mach3 features

« on: September 03, 2006, 07:42:22 AM »

I have no idea...

On the upside because of all your help in this group you are a gold card member So when you are setting up the lathe please feel free use it 

2290

Mach SDK plugin questions and answers. / Re: USB Plugin development

« on: September 03, 2006, 07:14:58 AM »

You are the first one that has got 2005 to work Art and I run 2003...

If you can get 2003 it should work fine..