Messages

3451

General Mach Discussion / Re: setting multipul milling depths

« on: March 06, 2006, 04:48:22 PM »

Is this in Lazy Cam? IF it is Please type the settings that you would like to change in to the selected  chain properties on the righthand side.

IF you need I can get you a pic or I will do a video...

3452

LazyCam (Beta) / Re: First Problem noticed

« on: March 05, 2006, 06:12:01 PM »

Try slowing down the feedrate with the FRO. The Green line in Mach is drawing a little slow I think....
 It runs great here

Thanks
Brian

3453

General Mach Discussion / Re: New to mach, machine won't move.

« on: March 05, 2006, 04:00:12 PM »

please go under the motor tuning page. Click on the graph for the X axis and press the up and down arrows. This should move the X axis...

3454

General Mach Discussion / Re: Toolpath doesn't display using V-carve demo G-code

« on: March 05, 2006, 11:42:10 AM »

I don't think it is your computer ... I will know more after I look at the file

3455

General Mach Discussion / Re: New to Mach 3 and have questions

« on: March 05, 2006, 11:34:28 AM »

There is no problem setting up the rutex drives to run on the GRex but you should know that the Grex is not ready to run a mill at this time...

3456

General Mach Discussion / Re: Toolpath doesn't display using V-carve demo G-code

« on: March 05, 2006, 11:32:39 AM »

Could you please send me the file that will not load so I can see if there is an error ?

3457

LazyCam (Beta) / Re: Lazy Cam (Beta)

« on: March 05, 2006, 08:05:13 AM »

Please post any files that are giving you trouble and please explane how you are getting the problem ...  This first release is to see how you like the workflow. I will fix any bugs that I can as well 

Have fun breaking it 

3458

General Mach Discussion / Re: setting multipul milling depths

« on: March 05, 2006, 07:12:19 AM »

click on the circle in LCam and you will see some cutting data pop up on the right side. There is a place to set the depth of each chain regardless of the layer...

3459

General Mach Discussion / Re: New to Mach 3 and have questions

« on: March 05, 2006, 07:09:37 AM »

Pete,
The best thing to do at this time is to read the Mach3 manual http://www.artofcnc.ca/UsingMill.pdf this will help with the questions that you are having about step and dir. As for the Parker stuff... sorry I have never used that.

3460

General Mach Discussion / Re: Toolpath doesn't display using V-carve demo G-code

« on: March 05, 2006, 07:05:15 AM »

Will it display the toolpath of any other Gcode file? If so do you see any error in the Status box at the bottom of the screen? There is also a place to turn the toolpath display on/off on the diagnostics page.

Hope that helps