Messages

2941

General Mach Discussion / Re: Combining various vbscript and gcode into a file versus a button

« on: May 23, 2006, 03:22:36 PM »

You could put your VB code into an Mcode and call the Mcode from the button... IS that what you are looking for?

2942

General Mach Discussion / Re: Override limits button on settings page not workin'??

« on: May 23, 2006, 03:20:57 PM »

Try changing the active low state for the limit. I don't have a mill to test with at this time

2943

General Mach Discussion / Re: Motor tuning question

« on: May 23, 2006, 03:19:22 PM »

Move the sliders for the Accel and Max vel. That should get you up and running

2944

LazyCam (Beta) / Re: Can't find Lazy Cam

« on: May 23, 2006, 11:56:44 AM »

LCam is buggy But that is getting better by the day  I have been running 1.90.********* and it has been running great! I think you will see 1.84 go away soon because 1.94 has been running well. If you think it is a program bug please post it and I will see what I can do to help! We are trying to make this as simple as possible to the end users so even if it is not a bug but something that is unclear we will so our best to fix it...

Thank you
Brian

2945

General Mach Discussion / Re: New to Mach3

« on: May 23, 2006, 11:48:28 AM »

One Ghz or better for the CPU... Pro or Home will work fine..

Welcome to the group and have fun!
Brian

2946

General Mach Discussion / Re: ook hollanders hier? die verstand van Mach2/3/4 enz hebben?

« on: May 23, 2006, 09:20:25 AM »

You can do it with Lcam but you are going to have to use COMP to get the Dia to the right size. I have to make a video after the bug fixes that I am working on.

2947

General Mach Discussion / Re: Override limits button on settings page not workin'??

« on: May 23, 2006, 09:17:35 AM »

Do you have the limits turned on in the ports and pins page..

2948

General Mach Discussion / Re: newbee needs a little help

« on: May 23, 2006, 09:12:15 AM »

If it is a mill you should be Good to go with LCAM but if ti is a lathe it is going to be a bit...

2949

General Mach Discussion / Re: newbee needs a little help

« on: May 22, 2006, 10:55:21 PM »

The DXF importer is not working because the old one was taken out... we will be building up a new one but it is going to be many months before we have it done.
Sorry about that
Brian

2950

General Mach Discussion / Re: Making my first cut... getting the DXF file into Mach 3 and working it...

« on: May 22, 2006, 03:19:10 PM »

Post the file and in Mach3 on the toolpath screen there are a some DRO's that will tell you how large the file will cut in every axis.
Hope that helps
Brian