Messages

1831

Show"N"Tell ( What you have made with your CNC machine.) / Re: Some wing molds out of mdf off of my big mill

« on: December 21, 2006, 11:04:26 PM »

Nice looking part! I need to build a mill that size at some point... How much did that endup costing in the end? (I could put a 5 axis head on that!)

1832

General Mach Discussion / Re: Stepper rregular or stalling in MDI or program run

« on: December 21, 2006, 10:52:05 PM »

You need to check sherline mode in under the ports and pins settings that should fix the problem that you are having

Thanks
Brian

1833

Galil / Re: Mach3 + Galil

« on: December 21, 2006, 10:49:02 PM »

GenGuy, download the term software form Galil to check that you have the galil registerd in the system. once you have it set up and running in there software I will send you the newest plugin that I am working with

I just got the spindle working, homing and limits working! I should be able to do a test cut tomorrow 

1834

General Mach Discussion / Re: Mach3 thinks it's moving Z from THC but Torch height unchanged

« on: December 21, 2006, 04:26:05 PM »

No problem
Did you tell Jim what the problem was?

1835

LazyCam (Beta) / Re: comments LC 2.00.031

« on: December 21, 2006, 10:21:59 AM »

To delete a layer right click on the layer in the layer tree and select delete... Tell me if that works

Thanks
Brian

1836

LazyCam (Beta) / Re: Drilling holes

« on: December 21, 2006, 08:51:59 AM »

If it is a point Lcam will drill them

1837

General Mach Discussion / Re: max feed rate?

« on: December 21, 2006, 07:57:51 AM »

Sounds like the computer is right on the edge of not running mach.. Keep it at 25KHz

1838

Mach3 and G-Rex / Re: Grex & MPG's

« on: December 20, 2006, 07:56:00 PM »

There should be some new firmware at the start of the year...  that is just the word on the street... (I hope it is true)

1839

G-Code, CAD, and CAM discussions / Re: Code preparation

« on: December 20, 2006, 07:53:40 PM »

Well I think the best thing to do is post a few files... We will see if we can get them to work in Lcam

1840

Show"N"Tell ( Your Machines) / Re: My setup

« on: December 20, 2006, 07:49:10 PM »

Nice! Better then anything that I have here to test with I have to get up and walk to the mill to test anything ;(