Messages

11

Mach4 General Discussion / Re: Serious Mach4 Mill problem with the use of cycles with G18 plane

« on: February 19, 2021, 04:10:57 PM »

Okay I will commit it to the source so it will be fixed forever !

12

Mach4 General Discussion / Re: Serious Mach4 Mill problem with the use of cycles with G18 plane

« on: February 19, 2021, 03:22:42 PM »

Use FireFox

13

Mach4 General Discussion / Re: Spindle RPM runaway

« on: February 19, 2021, 01:29:17 PM »

Have you put a meter on the output without the drive connected so you can see if your getting a variable voltage ?

14

Mach4 General Discussion / Re: Concept Validation: Dual Belt Spindle Setup

« on: February 19, 2021, 01:28:21 PM »

Nice! Looking forward to it.

15

Mach4 General Discussion / Re: Serious Mach4 Mill problem with the use of cycles with G18 plane

« on: February 19, 2021, 01:27:18 PM »

4.2.0.4629 is on the server... Now this version is the first one I have done with this PC so, I hope it is working as it should   FTP Dev versions

Thanks
Brian

16

Mach4 General Discussion / Re: X Box here we come!

« on: February 19, 2021, 12:00:41 PM »

We will be working on the Xbox more. I have shared the code with a few of the guys on here so I think we may have a few people helping . It will get much better!

17

Mach4 General Discussion / Re: Spindle RPM runaway

« on: February 19, 2021, 11:51:08 AM »

How are you converting the signal into analog for the drives? You must have some sort of PWM to analog converter ? We need to know more about your hardware to help with this .

18

Mach4 General Discussion / Re: Concept Validation: Dual Belt Spindle Setup

« on: February 19, 2021, 11:43:50 AM »

You make it shift and I more than happy to help you with the analog side!

19

Mach4 General Discussion / Re: Serious Mach4 Mill problem with the use of cycles with G18 plane

« on: February 19, 2021, 11:42:34 AM »

I had to convert your file to inch to test it (I was getting really confused looking at MM file and the machine moving in Inch in the background). But the good news is I think I got it! I am going to make a build for you to test so you can see if it works for you.

20

Mach4 General Discussion / Re: Serious Mach4 Mill problem with the use of cycles with G18 plane

« on: February 19, 2021, 09:49:22 AM »

I had some Xbox code I was working on... Now I can have a look at this. I am going to test it and see what happens. I should be be done testing this in about 20-30 min... I will tell you my findings!