Messages

3321

General Mach Discussion / Re: Modified pocket wizard?

« on: March 28, 2006, 03:50:49 PM »

I am in hopes to have Lcam doing all that stuff

3322

General Mach Discussion / Re: Campbell´s THC

« on: March 28, 2006, 03:49:43 PM »

It takes more than one P port to run with the THC. I think the THC takes one port... so the other can be used just the way you have it.

3323

LazyCam (Beta) / Re: Lazy Cam Issues

« on: March 28, 2006, 03:47:49 PM »

OKay this is good
There is a bug so it can;t put out more than one pass depth The good side is that I have fixed it for the next release
There no longer is an execute button...
and to rotate the view press the middle mouse button.

Thank you
Brian

3324

LazyCam (Beta) / Re: Can't download Lazy Cam

« on: March 28, 2006, 06:58:08 AM »

Try this:

http://www.machsupport.com/LazyCam.zip

3325

General Mach Discussion / Re: Jogging

« on: March 27, 2006, 09:20:16 PM »

Can you please check you jog mode? I think you may be in MPG mode

3326

General Mach Discussion / Re: Help with Position of Home and Piece Part

« on: March 27, 2006, 07:20:43 PM »

Can you post it as a jpeg... I can't read that other file.

3327

General Mach Discussion / Re: Rotary table question

« on: March 27, 2006, 07:19:30 PM »

That will work

3328

General Mach Discussion / Re: Minimum System Requirments for Mach2/3/4

« on: March 27, 2006, 07:14:48 PM »

-M,
You are going to need to get a 1Ghz or greater... Sorry

3329

General Mach Discussion / Re: Macropump

« on: March 27, 2006, 07:14:11 PM »

Art is adding the calls

3330

General Mach Discussion / Re: rebooting problem

« on: March 27, 2006, 07:12:49 PM »

There is a section in the manual that tells you how to take the driver out
You can download it from the download page here http://www.artofcnc.ca/Mach2.6.11.pdf It is the Mach2 manual but it will help you...