Messages

1241

LazyCam (Beta) / Re: Download lazycam...having problem with importing a DXF

« on: April 23, 2007, 04:45:10 PM »

We are going to work on getting it to work without mach3... 

Thanks
Brian

1242

General Mach Discussion / Re: On screen keyboard

« on: April 23, 2007, 04:19:56 PM »

You have to love google

1243

LazyCam (Beta) / Re: LazyCam Pro Turn profiles..

« on: April 23, 2007, 04:05:27 PM »

no the last line in the chain is telling the stock size... so if you draw it down it woudl be in ID out would be an OD

1244

LazyCam (Beta) / Re: Download lazycam...having problem with importing a DXF

« on: April 23, 2007, 04:02:46 PM »

We have the NEW code to open DXF's in Lcam now 

There is a small error with Arcs that we are working on... we have tested it and we can now open every dxf that would could not open in the past !!!!!!!!!!!!!

So it is looking better!

Thanks
Brian

1245

General Mach Discussion / Re: Abnormal condition

« on: April 23, 2007, 01:35:32 PM »

if you double click the led you can set the "normal" state

1246

General Mach Discussion / Re: On screen keyboard

« on: April 23, 2007, 01:34:42 PM »

You can also put a button on the screen to open the keyboard.

in VB you do the following:
Shell"osk.exe" 'This will open the On Screen Keyboard


and

Shell "calc.exe" 'This will open the calculator

Hope that helps
Brian

1247

LazyCam (Beta) / Re: Pulling my hair out

« on: April 23, 2007, 08:45:17 AM »

This should be fixed with the new version that we have ... The new importer has a bug and we are waiting for the bug fix at this time... Man is it ever a ton of work to get all this stuff working

1248

LazyCam (Beta) / Re: only smal part in mach3 3

« on: April 23, 2007, 08:41:33 AM »

Sorry it should have been a SPLINE

That is a line that has knot points making it bend in odd ways! We are looking into making them work but it takes time

Thanks
Brian

1249

LazyCam (Beta) / Re: LazyCam Pro Turn profiles..

« on: April 23, 2007, 08:39:11 AM »

Chip,
Lcam is getting all new posting classes! There are now sections for posting Mill,Lathe,Plasma, and Foam. this is going to fix some of the odd problems that we were having in the past.

Thanks
Brian

1250

General Mach Discussion / Re: limit and home switches

« on: April 23, 2007, 08:34:21 AM »

any switch will work... I like to use automationdirect.com

and you can jog the Z with the pageUP and page Down buttons

Thanks
Brian