Messages

931

Show"N"Tell ( Your Machines) / Re: Help! Hardinge CHNC Retrofit

« on: July 10, 2007, 05:41:20 PM »

The index pulse is to small You need to have a much longer pulse to have it work with Mach 3


Check out cnc4pc.com they have a pick up that will work very well

Thanks
Brian

932

General Mach Discussion / Re: Pick up where it left off

« on: July 10, 2007, 05:28:01 PM »

Cool you are not that far from me...  Tell me if you ever need any help

933

General Mach Discussion / Re: Unspecified failure message

« on: July 10, 2007, 08:58:04 AM »

Okay i just tested it here about 20 times no problem... how about a Gcode file that you have problems with and could be take a screen shot of the Macro directory? I wonder if Mach 3 is having a hard time with an other profile that you have on that computer.

Thanks
Brian

934

General Mach Discussion / Re: First time problem

« on: July 10, 2007, 08:50:33 AM »

To stop the timing problems you need to lock the speed of your network card. set the card to be a 10Meg/sec and I think you will be all set

You can't run the file over the network because it is a memory mapped file, it has to be this way because of how mach3 reads the data..


Thanks
Brian

935

LazyCam (Beta) / Re: Making Clamp Files

« on: July 10, 2007, 08:46:02 AM »

we found the problem and it is fixed in the rev that is online now Thank you for the info

Brian

936

General Mach Discussion / Re: write wizard syntax error.

« on: July 09, 2007, 10:23:02 PM »

You need to open the Macro and edit it, You can't edit and save if it pops up in the ERRROR window... there is no path to save the data too

That should do it!

Thanks
Brian

937

LazyCam (Beta) / Re: LazyCam 2.081 Issues

« on: July 09, 2007, 10:20:31 PM »

Paul,
Try changing the IJ arc settings in Lcam's Post options... I think that will fix the problem

Thanks
Brian

938

LazyCam (Beta) / Re: Lcam Request

« on: July 09, 2007, 10:17:49 PM »

Terry,
Set the leadin to the Dia of the tool that you would like to run and you will not have that error message (I Hope)

Thanks
Brian

939

LazyCam (Beta) / Re: Lazycam pro and MP1000 THC post

« on: July 09, 2007, 10:15:02 PM »

Sorry to say that I don't know what the Gcode file should look like Could you please post an example and I will see what I can do to get a post for it.


Thanks
Brian

940

LazyCam (Beta) / Re: LazyCam 2.080 Issues

« on: July 09, 2007, 10:12:07 PM »

You need to add a "shapes" directory and after you do that it should work... Art is adding it to the next rev.

thanks
Brian