Messages

2411

LazyCam (Beta) / Re: New Lcam with post processor

« on: August 14, 2006, 08:10:53 AM »

John and Chip,
I have done some testing and I can't get it to happen to me Could you please tell me every step? I would love to get this fixed

Thankyou
Brian

2412

General Mach Discussion / Re: DRO for Slaved Axis not displaying

« on: August 14, 2006, 08:08:35 AM »

I don't think the slaved axis will show the position... But it will move

2413

General Mach Discussion / Re: Inital reference points and limit switches

« on: August 14, 2006, 08:07:37 AM »

If you would like to do that.. Don' thave the sweitch setup to be a home switch

2414

Mach3 and G-Rex / Re: Future of MachIV?

« on: August 13, 2006, 10:24:05 PM »

I would hold off for the new firmware update.. it should be any month now.

2415

LazyCam (Beta) / New Lcam with post processor

« on: August 12, 2006, 10:58:38 PM »

There is a new Lcam with the ability to read a Post file... The Post file can be changed in notepad and I have included an example .pst file for you to play with. There is also a Doc in the Zip file that should help you with the PostVars that you will need to make your post. Please test it and tell me if you think you would like to have other PostVars added and how it works for you. So you can get this on the FTP server under LazyCam/LazyCam 2.60 With Post Doc's.zip

Thank you and sorry I can't tell you more... I and burnt out and need to get some rest 

Thanks
Brian

2416

General Mach Discussion / Re: "SOFTLIMITS SYSTEM MOVEMENT ABORTED"

« on: August 12, 2006, 10:29:48 PM »

if you are not using softlimits please disable them and it should fix your problem...

2417

General Mach Discussion / Re: Beter?

« on: August 12, 2006, 10:28:32 PM »

Mach3 has Much more toys and seems to be more stable then Mach2

Thanks
Brian

2418

Mach3 and G-Rex / Re: Future of MachIV?

« on: August 12, 2006, 09:19:11 AM »

Probeing is working and IV is no more

2419

General Mach Discussion / Re: dell optiplex

« on: August 12, 2006, 09:00:49 AM »

Do you have a meter that you can check it with?

2420

General Mach Discussion / Re: Inital reference points and limit switches

« on: August 12, 2006, 08:59:19 AM »

If you take a skim cut and type that value into the Xdro and press enter this will sift all tools to the right DIA this should help you...