Messages

3421

General Mach Discussion / Re: Gauge block offsets

« on: March 10, 2006, 07:54:22 AM »

No problem I have done it too 

3422

General Mach Discussion / Re: MAXPATH42 and Mach2

« on: March 10, 2006, 07:53:36 AM »

I am running a BP series 1 and 2 , Plasma and a lathe soon

IF you would like a hand gettting Mach3 running please send me your XML from mach2 and I will set up one for Mach3
thanks
Brian

3423

General Mach Discussion / Re: Kinematics

« on: March 10, 2006, 07:51:19 AM »

I think it will with the Grex... But that is some time out and it is also up to Art

3424

Mach3 and G-Rex / Re: Mach4 - couple of quick questions for Art.

« on: March 09, 2006, 08:16:52 PM »

It better be fixed... I just got my mill in that is going to be the testbed! I will be mounting the 1KW servo this weekend and putting in the GRex. This mill is going to have about everything that I can add VFD 4th axis and air everything. The only thing that it will not have is a tool changer O well that is next 

3425

LazyCam (Beta) / Re: What is the projected cost of LazyCAM

« on: March 09, 2006, 08:13:35 PM »

Hello James
There is Comp now and that is in version that comes with Mach3/IV
thanks
Brian

3426

General Mach Discussion / Re: Gauge block offsets

« on: March 09, 2006, 08:12:29 PM »

Type in the value and Press enter That is working here ...

3427

General Mach Discussion / Re: Lathe turret toolchanger

« on: March 09, 2006, 08:11:07 PM »

The CNC Lathes that I run the Turret moves out, then it turns and drops back in on the "pins"...
Just an FYI

3428

General Mach Discussion / Re: Homing in Mach 3

« on: March 09, 2006, 08:08:15 PM »

So if I understand what you are saying I think you need to add some debounce... OR the other problem that you may be having is you need to put .1 in the Home Off (Under Config/ Homing and Limits)

That may not do it but it is a good place to start.

3429

General Mach Discussion / Re: MAXPATH42 and Mach2

« on: March 09, 2006, 08:04:10 PM »

The Support for 3 is MUCH better and it will do MANY more things (I don't have 2 installed now )

3430

General Mach Discussion / Re: Shift Key

« on: March 09, 2006, 08:02:15 PM »

Press R and you will get FAST JOG and to turn it off press R again You can see if it is on by pressing Tab...