Messages

3171

General Mach Discussion / Re: Habla Español?

« on: April 21, 2006, 12:36:52 PM »

There is stuff in the works to get versions of Mach in many Languages..

3172

General Mach Discussion / Re: Issues with Mach3 going random

« on: April 21, 2006, 12:34:31 PM »

I did it in the NFS wizard

3173

LazyCam (Beta) / Re: not generatig a contious cutting path.

« on: April 21, 2006, 12:33:49 PM »

Thank you for the test files ! I will have a look at them as soon as I can.

3174

Newfangled Solutions Mach3 Wizards / Re: Mach2 Circular pocket question

« on: April 21, 2006, 12:32:29 PM »

Got yeah... Okay that is very fixable

3175

General Mach Discussion / Re: Issues with Mach3 going random

« on: April 20, 2006, 09:43:50 PM »

Try this...

G0 G49 G40.1 G17
G80 G50 G90 G98 
G20 (Inch)
G00 G43 H4 Z0.1
G00 X0.1875 Y-0.4063
G01 Z-0.1 F10
G41 P0.0625
G01 X0.0938 Y-0.4063F20
G03 X0 Y-0.5 R0.09375
G01 X0 Y-0.5
G01 X0 Y-1
G01 X-1 Y-1
G01 X-1 Y0
G01 X0 Y0
G01 X0 Y-0.5
G03 X0.0938 Y-0.5938 R0.09375F20
G40
G01 X0.1875 Y-0.5938F20
M5 M9
M30

3176

LazyCam (Beta) / Re: Versuion of LazyCan included in Mach3 download

« on: April 20, 2006, 09:37:15 PM »

I don't think it can be downloaded on its own...  there is a new version (of Lcam) in the newest Rev of mach3

3177

Newfangled Solutions Mach3 Wizards / Re: Mach2 Circular pocket question

« on: April 20, 2006, 09:34:57 PM »

They shouldn't be... Is your X axis reversed?

3178

LazyCam (Beta) / Re: not generatig a contious cutting path.

« on: April 20, 2006, 04:14:42 PM »

I think there is a gap from line to line... This will cause the problems that you are seeing. Could you please send me the file and I will check to see if this is the problem.

Thank you
Brian

3179

Show"N"Tell ( Your Machines) / Re: Got My mill running :)

« on: April 20, 2006, 02:13:25 PM »

I am still setting the mill up I have the PLC in the machine and about 50% wired up... As soon as I get it up and running I will post a few pic's of it

3180

General Mach Discussion / Re: First post

« on: April 20, 2006, 02:11:43 PM »

Here are some that I have used in the past
http://www.pmdx.com/
http://www.campbelldesigns.com/