Messages

1731

Show"N"Tell ( What you have made with your CNC machine.) / Re: radius

« on: January 11, 2007, 11:12:54 AM »

Yup and it is here on my desk Art has his over his desk on a shelf...

Great looking work!

1732

VB and the development of wizards / Re: output register (1040) over Modbus and VB

« on: January 11, 2007, 11:10:37 AM »

I think you would be better off to use the plugin that John P did.. Pete H should have a copy, John did a GREAT job on it!

1733

General Mach Discussion / Re: Controller doesn't recognize Mach3 at all.

« on: January 11, 2007, 11:02:29 AM »

Yup sounds like you don't have the ports and pins set right.. The good news is that this is not a hard one to fix
Post you XML file please.

1734

General Mach Discussion / Re: Will this modbus device work with Mach3

« on: January 11, 2007, 10:59:49 AM »

should...

1735

General Mach Discussion / Re: R2.0.031 and plasma.set

« on: January 11, 2007, 10:58:41 AM »

Herb,
Thank you for finding the problem! We have a flash screen that we are starting to test and if this works out you may get a new plasma screen

1736

Show"N"Tell ( Your Machines) / Re: And another Hardinge HXL retro fit - by a newbie :)

« on: January 09, 2007, 08:20:32 PM »

Roo got his HNC running on a Galil
Just got a video from him...

1737

Show"N"Tell ( Your Machines) / Re: Eagle KM-750..Anilam Crusader GX-M

« on: January 09, 2007, 07:21:22 PM »

Wayne do you have a link that I can have a look at? Art and I have to get the delta tau stuff up and running but after that

1738

VB and the development of wizards / Re: output register (1040) over Modbus and VB

« on: January 09, 2007, 07:18:41 PM »

Are you using the ModIO plugin? Or are you doing this in VB?

1739

VB and the development of wizards / Re: Chinese message !

« on: January 09, 2007, 07:14:33 PM »

You win the prize for the day... that is the first time that I have seen that!

1740

General Mach Discussion / Re: no wiring diagram?

« on: January 09, 2007, 07:11:13 PM »

Mail Dan and tell him that you need to get some info and he should help you He has been good in the past.