Messages

981

LazyCam (Beta) / Re: Lazy Cam 2.02 "File Could not be opened"

« on: June 25, 2007, 09:31:54 PM »

This should be fixed in the latest version of Lcam off the web.

Thanks
Brian

982

LazyCam (Beta) / Re: Unexpected Error

« on: June 25, 2007, 09:30:59 PM »

I tested it here and it is working ... I will update may code with Art and see if there is a bug in his Rev.

Thanks
Brian

983

LazyCam (Beta) / Re: List of problems & bugs

« on: June 25, 2007, 09:29:18 PM »

Thanks for the list We will see what we can do to get this all fixed so we can move on to Quantum

984

LazyCam (Beta) / Re: Unexpected Error

« on: June 25, 2007, 09:28:02 PM »

I will have a look at your DXF... I think I know where the problem is

985

LazyCam (Beta) / Re: G-Code line limitation???

« on: June 25, 2007, 09:26:47 PM »

There is a 50 line limit to Lcam if you are not a Licensed Mach3 user on that computer... We had to do this because we started to get users that were running the base version of Lcam and Not mach3! There is just no time to support a free product If you have a licensed version of Lcam you are all set and you don't need to have a Mach3 license (There are people running Lcam to program other controls )

Also the Gcode limit of Mach3 is now 500 because there were machines being shipped with Demo version of mach3 and the OEM was telling them that there was a 1000 line limit to the control! O well...
Brian

986

LazyCam (Beta) / Re: Lead Ins/Outs

« on: June 25, 2007, 09:16:48 PM »

I see the error that you are talking about after looking at the code I think the only place that I can add the leadin is after you press the clean button... I will have it pop up and ask you if you would like to have a leadin added to every chain if that is selected.

Thanks
Brian

987

LazyCam (Beta) / Re: LazyCam 2.076 Mach3 Load Option

« on: June 25, 2007, 09:10:22 PM »

Hello Chip,
That is Art's section of the code We had a look at it but I have no idea if he got it fixed Can you tell me if this is still a problem?
Thanks
Brian

988

LazyCam (Beta) / Re: text engraving

« on: June 25, 2007, 09:09:03 PM »

To Pocket the text you need to have a box around the text. Select the box and tell Lcam Pro to pocket out the box and it will know that there is text in the box and pocket around it .

Hope that helps
Brian

989

General Mach Discussion / Re: stepper advice

« on: June 25, 2007, 02:40:16 PM »

it should work... check the Acceleration settings and also check that you don't have the pins assigned to any other  axis

Thanks
Brian

990

General Mach Discussion / Re: Windows time-sharing issues

« on: June 25, 2007, 02:36:21 PM »

You will not have a problem with bad circles if you have a good machine to start with... The only problems that we have had like that is from Backlash or machine flex. Also please try the software first! You can run up to 500 lines of Gcode for free