Messages

3271

LazyCam (Beta) / Re: Lazy Cam Crash Problem

« on: April 05, 2006, 10:44:13 AM »

I think I have found where this problem could be coming from.. should be fixed in the next few days
Thank you

3272

LazyCam (Beta) / Re: Lazy Cam in Mach3 download

« on: April 05, 2006, 10:43:08 AM »

The newest Rev of mach 3 has it in it and under File in mache 3  you should be able to load it

3273

General Mach Discussion / Re: On to the next step

« on: April 05, 2006, 10:41:33 AM »

Check out Automationdirect.com under limit switches. there are some small ones that should do fine for that...

3274

General Mach Discussion / Re: Homing in Mach 3

« on: April 05, 2006, 10:31:59 AM »

It sound like the Dir pin is not changing... If you jog the Z can you move it up and down?

3275

General Mach Discussion / Re: Manufacture PCB

« on: April 05, 2006, 10:19:01 AM »

Thank you !

3276

General Mach Discussion / Re: Best computer to run Mach

« on: April 05, 2006, 10:18:08 AM »

Some thing that is not on board video and a single processor. 1.5Ghz Min with 512 ram should last for many upgrades..

3277

General Mach Discussion / Re: wrong feed rates at the machine

« on: April 05, 2006, 10:15:56 AM »

Is it moving 2" when you tell it to? or is it moving 1" if you tell it to move 2"?

3278

General Mach Discussion / Re: Pocket wizard acting strange!

« on: April 05, 2006, 10:02:57 AM »

Could you please upload the Gcode file and I will see if there is a problem in the Gcode.

3279

General Mach Discussion / Re: On to the next step

« on: April 05, 2006, 10:01:45 AM »

How big is the lathe?

3280

General Mach Discussion / Re: Teach Wizard ( Please teach me)

« on: April 05, 2006, 09:59:18 AM »

I will be making a video of how to use the wizard once I have the new test mill up and running... But for now  there is a thread on there that will show you how to get started.
Check this out:
http://machsupport.com/forum/index.php?topic=63.0