Messages

1311

General Mach Discussion / Re: Computer Requirments

« on: April 11, 2007, 07:43:59 PM »

That sounds goos for the CPU, you just need to look out for the onboard video It can be trouble at times

1312

LazyCam (Beta) / Re: LC Pro not working?

« on: April 10, 2007, 11:08:00 AM »

Okay, We will have a look at the problem

Thanks
Brain

1313

General Mach Discussion / Re: Axis movement limited to 1"? Demo Version??

« on: April 10, 2007, 11:06:53 AM »

It sounds to me like a PC problem... You will have to take out all the power save settings and so on to get it to work, after you do that it will kill the battery in no time So I would wait for the desktop computer

1314

LazyCam (Beta) / Re: LC Pro not working?

« on: April 10, 2007, 09:34:08 AM »

Yes you need to turn off any Chains or layers that you would not like to cut. If you can see it on the screen it is going to be cut

If you offsetting  lest then the Rad of the circle?

thanks
Brian

1315

General Mach Discussion / Re: Using Mach3 Via Serial port?

« on: April 10, 2007, 09:24:54 AM »

Many of the users use there stuff... I have not used them my self

But they should work!

1316

General Mach Discussion / Re: Mach3 problems

« on: April 10, 2007, 09:22:40 AM »

Could you please look on the diagnostics page and tell me what you have in the "time in int" DRO?

Thanks
Brian

1317

General Mach Discussion / Re: Wav files

« on: April 10, 2007, 09:18:32 AM »

You are not going to be able to do that without VB

1318

General Mach Discussion / Re: Roatary/stepper stalling

« on: April 10, 2007, 09:14:35 AM »

Please post you XML and i will check to see if there is a problem

Thanks
Brian

1319

General Mach Discussion / Re: Using Mach3 Via Serial port?

« on: April 10, 2007, 09:12:37 AM »

That is not going to work You will have to rewire direct to the the drives

1320

General Mach Discussion / Re: Axis movement limited to 1"? Demo Version??

« on: April 09, 2007, 10:05:39 AM »

Check your Motor settings and set you Max velocity lower. Also set your Jog Vel to 100% by pressing Tab. This will allow you to test your motors at max speed.

Thanks
Brian