Messages

661

General Mach Discussion / Re: Loosing steps and stalling Help Please

« on: October 22, 2007, 10:03:21 AM »

What is this for a computer! This looks like a Laptop computer and you need to have a look at the Optimization Guid here:
http://www.machsupport.com/optimisation%20XP.txt

If that is no help I think you need to get a Desktop computer to run your machine ...
Thanks
Brian

662

General Mach Discussion / Re: Constant velocity

« on: October 19, 2007, 09:11:01 PM »

I just got back and I will work with Art to see if we can find where the problem is with the CV... Thanks and sorry for the delay

663

Galil / Re: Mach3 and Galil ... Getting better

« on: October 19, 2007, 09:07:50 PM »

You need to have the Galil registered on your system before you can use Mach3 to move the device...

664

General Mach Discussion / Re: Galil 1842/2900 mach 3 setup

« on: October 19, 2007, 09:00:50 PM »

I am back in town now and I should be able to get started on the Galil Monday.... If you guys would like to help me with getting it to work on your system that would be GREAT

So Monday I will wire the Galil into my computer and we will see where it takes us!

Thanks
Brian

665

General Mach Discussion / Re: A and B axes

« on: October 09, 2007, 10:30:09 AM »

You just tell it the steps per unit and you are good to go

666

General Mach Discussion / Re: Run from Here G91 Position problem

« on: October 09, 2007, 10:24:40 AM »

Sorry I think you have found a limitation

667

General Mach Discussion / Re: Hercus PC 200 CNC lathe retrofit

« on: October 09, 2007, 09:27:28 AM »

It could be done.. you need to have a look at the servo drives from Gecko and CNCTeknix. Setting up the amps and wiring the machine is the hardest part of that project

Thanks
Brian

668

General Mach Discussion / Re: plasma thc on the fly

« on: October 07, 2007, 10:18:28 PM »

Please get the latest update on the page... I think there is a fix in there for that

669

General Mach Discussion / Re: Joging help needed

« on: October 07, 2007, 10:16:11 PM »

There is a macro call but  you could just move the controls to the main screen if you like in Screen4

thanks
Brian

670

General Mach Discussion / Re: Jog Speed in Incremental Move

« on: October 07, 2007, 10:12:29 PM »

Set your feedrate  to be about 60IPM and you should be good to go (Inc moves look at the feedrate for the move)

thanks
Brian