Today I installed the 2010 screenset, I placed the macro's in the right folder and activated the brains. If I try to zero my tool the spindel moves down, stops on the plate and than retracts all the way to the Z axis limitswitch. The machine like's to go to a positive Z machine coordinate (and it can't).
I have set the change position in machine coordinates (X+135 Y+90 Z-15) Z-15 is 15mm below my home/limit position, soft limits are set to -2mm
The machine has no problems with the G31 command, If I use a 'simple' zero script it works like it should.
Anything I can do about that? I would realy like the tool change capability's of this screen.