Been a bit busy on the lathe today I am afraid so never got much testing done, did manage to do a rough turn on dia and then a finish turn and it seemed fine although I did get an cypress error, forgot to bring the screenshot home with me I am afraid so cant post, will attach tomorrow.
Also still cant bore due to the negative values for X that I need, do you think you will get that worked out or is it going to be a problem?
One thing that gets me every time is the Start X , I keep putting in the dia of the stock and it will run a pass at that dia so have to remember to deduct my DOC from stock so as not to waste a pass. Also similar on a finish pass, say its 52mm dia and I want to take to 50mm with DOC of 1mm then it will do two passes if I put in 52 as start and 50 as end, first pass being 52mm. So what is needed is 50mm for X start and 50mm for X End, just seems a bit strange to have to do that?
Hood