been a bit since i posted here, been pretty busy actually.. this one was a bit different to do.. challenge was to cut it with hollows to bring weight down as its to be cast in platinum... even a 5th axis would have struggled with this so öut of the box"time
1: cut flips as per usual, add some caps
2: run rotary path over hollowing areas to cut through solid heart sections
3: use caps to plug holes only 1mm deep from top, melt into place with wax pen
4: run full rotary path
5: drink beer.. kick dog.. shout at kids.. fart..
(dusted gold to photograph better)