Hi All
This week I try some brains (for me as beginner is the most WANTED/Easy way) Hope....
I breake Thomas retrofit Plan that he give me
(with Brain - design) because I have at Home one bench table that simulate 24V Inputs and I need to test and test &....CSMIO+Mach
1 Purpose is to :
Activate True signals for/on enable axis;
Else deactivate it with (Invert) signals that suppose STOP MACHINE (e.g. limit switch + or -, stop MushroomButtons, low pressure on Vacuum etc)
Declare Inputs trough the ModBus unassigned pins on Mach3-( this way we can spare some Mach3 pins/Inputs) and go on Outputs (assigned on Mach3)
*added one Timer (2 sec ) let the drives energize ....
I found that if declare Inputs & Output ONLY with ModBus addresses (without Mach3 assignations) in some cases the Output stay on active state (even I disable the running Macro from Brain control), those will dectivate ONLY if I reset the Mach3, it seems they stay on active state somewhere (RAM of PC, on CSMIO ?? )If I declare the Inputs trough the ModBus and the Outputs trough Mach3 (Port&Pins) then the Brain works fine.
Other Issue (not Importat ) is: if you declare Inputs or Outputs by ModBus , then you can't made any distinction on seeing wich is the input and wich is the Output (View Brain, or Brain EDIT)....
@Thomas have you any info/manual about the item inverter HSD DS7500 ?
(if I made some syntax wrong please sorry for my bad English.....)