Hello Guest it is March 28, 2024, 12:37:03 PM

Author Topic: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A  (Read 68952 times)

0 Members and 1 Guest are viewing this topic.

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #60 on: May 25, 2015, 12:00:34 PM »
Hi Emil,

at least i would seperate axis Limit Switches (can stay in series) and the E-Stop chain,
create a inustrieal Standard estop circiut (e-stop relay and main power contactor for all Motors).
all this Software e-stop circuits are not save for my mind.

Thomas
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline slvm

*
  •  68 68
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #61 on: May 25, 2015, 01:29:36 PM »
Ok Thomas
As I understand from you following:
1-let the Emergency chain as it is 2-(or rewiring +,- limits switches out of the chain ?)
& create another e-stop - for this I have available one mushroom button and for Power drives I have one separate button (ready on drives)  on the panel / closet  .

Regarding the axis uncontrolled movements I will try to find; if any wrong pin assignation from Osai to encoder connector (I will measure the A+A- B+B- Z+Z-  pins)
You are 100% right about the safety standard, machine run on X along 2800 mm with 20m/min, if someone is hit (Y axis is about 250kg) then will be like a car accident.I visit someone with one home-made cnc and I note the poor safety on it....
thank you
I apologies on the moderators for so many posts ,but hope all my answered questions will be useful for other users...
« Last Edit: May 25, 2015, 01:39:03 PM by slvm »

Offline slvm

*
  •  68 68
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #62 on: May 31, 2015, 04:52:26 PM »
Hi
On this week I do following :
Rewiring the encoders and Analog to csmi-o after the Baumuller/drive manual, all is fine now, all uncontrolled movements are stoped, I assume on Osai wiring to encoder connector somethingh was wrong...
I tune the motors untill I got one smooth movement and I Autotune the PID on all axis, it seems everythingh is fine, the machine run like in "butter" with smooth accel and brake, voltage on csmio max +/-7,5 V
after I calibrate the mesurement/pulses untill I obtain same unit on Mach and in real unit movements, the biggest error is on Z=0,03 mm (I assume because equilibration), after declare baclslah 0,03 mm error go = 0,00

I need help with:
1-After Homing I have no ideea how can I reset the machine coordinates at 0 ?
2-Got problem on wiring and declare inputs/outputs on  the (VFD-spindle ) , found no where  (Mach3-csmio) somethingh about frequency level and frequency reached (attach inverter electr schema) ?
Also I google on HSD 7500 inverter and have no results.... ???
« Last Edit: May 31, 2015, 04:54:51 PM by slvm »

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #63 on: June 01, 2015, 02:38:02 AM »
Hello Emil,

--I need help with:
--1-After Homing I have no ideea how can I reset the machine coordinates at 0 ?

are you using the 1024 screenset, if yes have a look in diagnostic page, there you can see
all coordinates. normaly the machine coordinates are set to 0 by reference, what you see
in the main screen are the work offsets, witch may be different.

--2-Got problem on wiring and declare inputs/outputs on  the (VFD-spindle ) , found no where  (Mach3-csmio) somethingh about frequency level and frequency reached
--(attach inverter electr schema) ?

i have written HSD an email about manual.
i think for the beginning it is enought to wire
-csmio analog output to analog input of vfd
-csmio digital output for enable vfd
-inverter ok to a csmio input
-and if you want the frequenzy reached to a csmio input

at least the 24V and GND.

Thomas



anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline slvm

*
  •  68 68
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #64 on: June 01, 2015, 02:43:21 AM »
Thank you Thomas !
I will wok on VFD wiring diagram today and post here to have your opinion.

Offline slvm

*
  •  68 68
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #65 on: June 04, 2015, 04:42:12 AM »
I have one wiring schema for the inverter , But I'm still concerning over those Analog Input....
@Thomas- have you any news from HSD, I try to find/google on HSD 7500 Manual but got no file found...

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #66 on: June 04, 2015, 06:29:28 AM »
Hello Emil,

i have got no answer from HSD.

the wiring diagram looks ok, the only signal
i am not clear is this frequency level signal.
may be the best thing is to fire up the spindle
and have a look what is going on with this signal.

Thomas
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline slvm

*
  •  68 68
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #67 on: June 04, 2015, 11:43:48 AM »
Thanks Thomas
I think is another mistake (knowingly or perhaps not) from the manufacturer of the electrical closet.
BTW I check all inputs and outputs , and discover 5-6 mistakes on pin assignations....e.g. on of them was by Axis enable (to output)
I wonder how is that possible to CNC-machine with start price at 125.000 euro on 2002 !?

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #68 on: June 04, 2015, 12:35:49 PM »
Hello Emil,

here: http://www.gk-world.com/html/gongkongziliaowo/bpycd/bianpinqi/2013/1211/69372.html
i found a manual (scrolldown to get to wiring diagrams).
but some of the terminal numbers are different.

not realy shure what we can thrust ?

Thomas
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline slvm

*
  •  68 68
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #69 on: June 05, 2015, 12:26:51 PM »
Thank you Thomas -
you are great
I wonder now if the electrical schemas from Dierre is OK ? I start to really doubt their info....after I found a lot of errors on their schematic project >:D ;D
I have some screen shoot over the schemas , I think the last solution is to dismantle the inverter and check if it looks like this manual, pin assign and other...