Hello Guest it is March 28, 2024, 06:36:59 PM

Author Topic: Mach3, Opt Laser 5W and Aspire  (Read 10646 times)

0 Members and 1 Guest are viewing this topic.

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #90 on: February 24, 2021, 01:47:07 PM »
Ok, I'll see what I can do to build a board and come back,

thanks for you time and effort, much appreciated

Allan

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #91 on: February 24, 2021, 01:56:04 PM »
Just checking, It says something about Diode lasers using Active High TTL input, is mine?

does it show a different board for that, sorry out of my depth here!

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #92 on: February 24, 2021, 02:15:57 PM »
you are right, sorry to Point you to the wrong circuit.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #93 on: February 24, 2021, 02:24:24 PM »
you are right, sorry to Point you to the wrong circuit.

Just to be sure it's the active high one I need to make?

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #94 on: February 24, 2021, 06:05:42 PM »
To be honest I don't understand the schematics drawing or understand how to read the truth table, any help would be really appreciated.

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #95 on: February 25, 2021, 12:28:11 AM »
you have to choose TTL(H) variant.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #96 on: February 25, 2021, 01:20:47 AM »
I just don't understand the drawing schematic of the board

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #97 on: February 25, 2021, 03:18:55 AM »
is there any reason the drawing can't be like the attached so an idiot like me can understand?   :)

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #98 on: February 25, 2021, 06:09:21 AM »
Hi Allan,

I am sure you are not an idiot but if you need to make one of these boards I can provide you with a circuit diagram although I should perhaps read through your laser manual to determine if such a board is really necessary or not.

I have been using a UC400ETH controller for over a year now but not with Mach3.
Stupid question but have you established that the Mach3 plugin for the UC400ETH does in fact support the M11Px / M10Px command set ?

Tweakie.
PEACE

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #99 on: February 25, 2021, 07:05:09 AM »
What do I need to do to find out?

Allan