Hello Guest it is March 28, 2024, 04:49:02 AM

Author Topic: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A  (Read 68930 times)

0 Members and 1 Guest are viewing this topic.

Offline slvm

*
  •  68 68
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #40 on: May 18, 2015, 06:36:52 AM »
Thank you folks...!

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #41 on: May 18, 2015, 07:16:08 AM »
Ok just tested, you need the Serial Non Plugin chosen and also the Bit Only box.

Hood

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #42 on: May 18, 2015, 10:22:54 AM »
Hi,

tested on my -M machine.
exactly like Hood described.

Thomas
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline slvm

*
  •  68 68
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #43 on: May 18, 2015, 04:14:16 PM »
@Hood
@Thomas
Thank you ! IT  WORKS GREAT   :D

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #44 on: May 18, 2015, 04:31:57 PM »
OK,
i think your B/C axis can work as a "normal" CSMIO-A axis,
so the only little problem witch is left, is to get this C/B axis
controler (Witch is now in a positionig via RS232/mode ore someting like this),
into a -/+10V mode.

Thomas
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline slvm

*
  •  68 68
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #45 on: May 19, 2015, 01:37:12 AM »
Yes Thomas
I intend to try to use the 6-th encoder Input for this.
But I'm afraid I must reprogramm the drive to work on -/+10V mode (configured and calibrate) , it is some kind of software Program (named winbass-from OSAI/Baumuller,I guess in fact the drives are manufactured from Baumuller but Osai just name the drives with their name)...
« Last Edit: May 19, 2015, 01:39:38 AM by slvm »

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #46 on: May 19, 2015, 03:58:53 AM »
Hi,
But I'm afraid I must reprogramm the drive to work on -/+10V mode (configured and calibrate) , it is some kind of software Program (named winbass-from OSAI/Baumuller,I guess in fact the drives are manufactured from Baumuller but Osai just name the drives with their name)...

yes controller has to be reconfigured, but you have the others witch are running in the right mode.
had a look on my old laptop, because i have worked with Baumüller drives about 10-15 years ago.
i have a version of winbass installed, an still a install file for this software.
if you give me a serialnumber/type of the controller i can check with Baumüller weather this is the
right version to configure this drive.

Thomas
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline slvm

*
  •  68 68
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #47 on: May 19, 2015, 04:36:18 AM »
I got one pic with the serial number and the code tabel OSAI-BAUMULLER.
Hope this is ok for you to identify wich version I have....
I lock on the help program file but it seems I will need to have master degree on Automatization to achieve the set-up on one such drive... :-[
Thank's for info,
« Last Edit: May 19, 2015, 04:39:25 AM by slvm »

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #48 on: May 19, 2015, 08:04:20 AM »
i am able to select your driver in my software.
i have put the software in my dropbox.
you should get a email.

Thomas
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline slvm

*
  •  68 68
    • View Profile
Re: Retrofit CNC Bulleri FPM 2813-Osai controll with CSMIO-IP-A
« Reply #49 on: May 19, 2015, 08:35:04 AM »
 8) Already got it !
thank you Thomas.
« Last Edit: May 19, 2015, 08:37:00 AM by slvm »