I have now gotten my machine up and running Flawlessly well on Sunday... Not one problem... I installed the home switches one at a time checking each as they were hooked up.. It all worked great until I started it up today... It was ok on Tuesday, infact it ran for a 6 hour program with no problems....Now today when I started it up I ran out X,Y,and Z then checked the homeing as I was planning on setting up a fixture with some manual tool changes and a few of the same part...
At first it homed Z fine, then X went the opisite direction.. When it came to Y it moved a few inches pretty quick and stopped... Nothing was working properly at this time.. No moves possable, with the Shuttle pro, or the tab control... I hit the ESC key and it scrolled SCRIPT TERMINATED across the bottom and then I could move the machine, but did not have any movement in the DRO...
I checked ports pins and homeing limits.. I got the X going the correct direction, but then Z tryed to home - .....
I had to stop for other business but at the time I stopped messing with it it would not home any of the axis... any attempt would cause some script to not complete its task, seemingly locking it down.....
I still have Camsoft installed, the machine runs in the same manner as before the installation of Mach with camsoft.... Why??? I hate some of the camsoft features, and Mach ran so much better than camsoft..... Help!!!!!!!!!!!.?>?>?>?