new to the forum, I have a Platform CNC from Grunglanu design. I have built this from a kit and its working well.
I am trying to complete the electronics. I want to control my water cooled spindle (on/off) and speed from Mach3.
I have a Gecko 540 drive, Huanyang Inverter and 2.2kw spindle. I have been running the spindle directly from the inverter.
I have read the Huanyang manual and shifted the jumper to use external control, changed the PD001 from 0 to 1, also to
allow external control.
FRom the Gecko I have pin 6 conected to FOR on the inverter and pins 7-9 to GND, VI and 10v+.
I don't understand how to set in ports and pins to get everything running.
Best times are Tuesday afternoon PDT July 7th of Thursday 10 - 6.
SFPrinter