Hello Guest it is March 29, 2024, 03:21:51 AM

Author Topic: Mach3, Opt Laser 5W and Aspire  (Read 10652 times)

0 Members and 1 Guest are viewing this topic.

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #40 on: February 23, 2021, 08:58:04 AM »
Do you mean bridge while running the gcode?

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #41 on: February 23, 2021, 09:13:24 AM »
I've taken some screen shots of settings incase

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #42 on: February 23, 2021, 09:15:29 AM »
Spindle

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #43 on: February 23, 2021, 09:15:39 AM »
if you exceute a M3 S200 in MDI line this should Switch on laser with low power,
and if it's on make the Bridge to see what is Happening.
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #44 on: February 23, 2021, 09:16:46 AM »
Ports

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #45 on: February 23, 2021, 09:24:43 AM »
No it doesn't stop the laser

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #46 on: February 23, 2021, 09:37:00 AM »
https://youtu.be/AT_wzEpxEPw

So you can see what it doing
« Last Edit: February 23, 2021, 09:39:40 AM by A11an »

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #47 on: February 23, 2021, 10:06:56 AM »
ok lets try step by step

first test with MDI Input (no Gcode running):

1st Input:       M3 S200         ->this should turn ON laser with low power
2nd Input:       M3 S0         ->this should turn OFF laser
 
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #48 on: February 23, 2021, 10:14:30 AM »
Hi Allan,

This is really not going to work for you with two people making conflicting suggestions.

As I said earlier I leave it all to TPS.

Tweakie.
PEACE

Offline A11an

*
  •  62 62
    • View Profile
Re: Mach3, Opt Laser 5W and Aspire
« Reply #49 on: February 23, 2021, 10:35:28 AM »
Hi Allan,

This is really not going to work for you with two people making conflicting suggestions.

As I said earlier I leave it all to TPS.

Tweakie.

Tweakie

I have only made changes you have suggested, I wouldn't change them between conflicting advice, yes I have turned the laser on and bridged the terminals but that's just a test.

Like I've said I appreciate all the help I can get, it's not fair to post a problem on a forum and not let all give advice/ opinions.

Just looking for friendly advice

thanks

Allan