Hello Guest it is March 28, 2024, 05:03:35 PM

Author Topic: CS Labs CSMIO/P-A  (Read 51071 times)

0 Members and 1 Guest are viewing this topic.

Re: CS Labs CSMIO/P-A
« Reply #240 on: August 19, 2018, 12:03:24 PM »
Hi Craig

Yes, I do have the software installed but unfortunately, I didn't get the RJ 45 to USB converter cable. Reading up you can do most of the stuff direct from the Drives control panel. I've been looking at the scaling information which is confusing me slightly at the moment.    :(

Cheers
Mick
Re: CS Labs CSMIO/P-A
« Reply #241 on: August 19, 2018, 02:52:41 PM »
Hi,
do yourself a favour, get the cable and use the software. Programming through the panel is a joke.

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'
Re: CS Labs CSMIO/P-A
« Reply #242 on: August 19, 2018, 03:23:57 PM »
Quote
do yourself a favour ...

Absolutely agree.

Allan
Re: CS Labs CSMIO/P-A
« Reply #243 on: August 19, 2018, 03:29:39 PM »
Hi
Yes will do but everything is a 6 working day lead time with this stuff.
Will have a dabble in the mean time.
There are loads of rj45 to usb converters freely available on the net. Would these be a standard cable? Or would I need the genuine one?&
Cheers
Re: CS Labs CSMIO/P-A
« Reply #244 on: August 20, 2018, 02:48:56 AM »
Hi,
hey.....six days....you could in the meantime buy your missus flowers, a night out on the town, cook her a romantic dinner....and have just
enough brownie points to get that spindle servo! LOL

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'
Re: CS Labs CSMIO/P-A
« Reply #245 on: August 20, 2018, 03:14:15 AM »
Lol
Your a funny guy.

Cheers

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: CS Labs CSMIO/P-A
« Reply #246 on: August 20, 2018, 05:33:46 AM »
These work for the Lexiums not sure about the drives you have though.
https://www.ebay.co.uk/itm/KMTronic-USB-RS485-FTDI-Interface-Converter-BOX-/281257472746?hash=item417c4072ea


I also got an adapter set from RS which did various drives but it was for serial connection to the computer so I also needed a serial to USB adapter, which I already had anyway.

I will see if I can find the RS link but I think it is more expensive.
Re: CS Labs CSMIO/P-A
« Reply #247 on: August 20, 2018, 03:58:20 PM »
Hi Hood

Cheers for the link. I've ordered the one from Schneider now. Along with the CN1's that didn't arrive. >:(

Mick

Craig

I took your advice on the flowers and she's pricing the spindle drive and motor in the morning. Lmao
Re: CS Labs CSMIO/P-A
« Reply #248 on: August 21, 2018, 01:35:15 PM »
Hi All

Any idea where to buy the D SUB 50 connectors? Ordered genuine ones from Schneider with pre-attached cables who are now saying they are made to order with no guaranteed lead time. They are not the standard DSUB 50 connectors. They are about half the size. I can't find any more info in the manual except DSUB 50 >:(

Cheers
Mick
Re: CS Labs CSMIO/P-A
« Reply #249 on: August 21, 2018, 01:45:58 PM »
Hi,
I suspect they are high density sub D . I got mine from Element14.

Can you post a close up pic? Also the overall length, I'm guessing it has the same shell size as a DB25 parallel printer cable
but with double the number of pins.

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'